DWL@DWL10000177143
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
|---|---|---|---|---|---|---|
| 7.0.0.3 | * | 21.10.2024 | 378 MB | EXE | Automation_Studio_Target_for_Simulink_7.0.0.exe | |
| Popis |
Automation Studio Target for Simulink B&R Automation Studio Target™ for Simulink provides an easy-to-use but powerful solution for implementing advanced closed-loop controllers on B&R hardware. Providing an additional Simulink blockset for variable and parameter exchange, B&R Automation Studio™ Target for Simulink supports the whole range of B&R hardware for integrated automation. At the push of a button, source code optimized for B&R target systems is generated and automatically embedded into an Automation Studio™ project. Standard variable interfaces guarantee real-time data exchange between automatically generated programs and parallel tasks. Revision history: V7.0 10/10/2024 - Support AS 6 - Support R2024b - bugfix Ext. Struct Block overwrites Struct datatypes V6.9.1 21/05/2024 - bugfix multi level bus depth in Ext. Struct In Block - bugfix WebInterface: added exceptions for some non usable blocks added - security update: usage of TechnologyGuarding - security update: install directory V6.9.0 20/12/2023 - Support R2023b - Support Array of Buses in Hotplug Interface V6.8.0 24/03/2022 - Support R2023a - bugfix Automatic Transfer on real PLC V6.7.1 30/11/2022 - bugfix Sim.Signals in Combination with Sim I/Os V6.7.0 14/10/2022 - Support R2022b - Support Automation Studio 4.12 - feature Simulink Web Interface: Stateflow support - bugfix Sim I/Os for generating code for referenced models V6.6.1 18/07/2022 - bugfix Automatic Transfer on ArSim - bugfix Config selection in B&R Config Block GUI - updated blocks in B&R demos with PID controller V6.6.0 25/4/2022 - Support R2022a - Support Automation Studio 4.11 V6.5.1 2/12/2021 - Support R2021b - EULA page included into installer - feature Simulink Web Interface: Simulink.Signal support - feature Simulink Web Interface: Simulink.Signal as Bus support - feature Simulink Web Interface: Depth for Subsystems and referenced models - feature Create Simulink.Parameter: Bus support - bugfix Create Simulink I/Os and Create Simulink.Parameter: stable build process for referenced models V6.4.2 30/07/2021 - bugfix Simulink Web Interface for Enums in Busses and Array of Busses - bugfix B&R Extended I/Os when variables are used as parameter V6.4.1 23/04/2021 - Added error message in Config Block if AS project is in numerically named folder - bugfix change cycle time for APC2200 - bugfix create Simulink.Parameter for SimScape model - bugfix External Mode for SimScape model V6.4.0 19/03/2021 - Support R2021a - Support stop for below R2018a - Codecompletion for B&R Config Block API - bugfix B&R Config Block Opening GUI on older MATLAB versions V6.3.1 15/12/2020 - feature Hot Plug Block: multiple Instances allowed - feature Hot Plug Block: new refresh factor editfield in GUI for setting update time - bugfix Hot Plug Block: if datatype is string, no error is thrown but a warning - bugfix Package field in B&R Config Block: SSC_includes is copied in root folder now - bugfix multidimensions in B&R Parameter block - bugfix B&R Config Block: now all 8 task classes are chooseable - bugfix B&R Config Block: ode1be solver now chooseable V6.3.0.68 30/10/2020 - Support R2020b - bugfix Hot Plug Block: Bus Element Variables not shown when declared as global - bugfix empty spaces in Bus Element Comments in .typ file not shown when generated as function block - german documentation revised - added SimScape pre-built library for faster compilation in AS project V6.2.2.59 28/08/2020 - bugfix Simulink I/Os - bugfix Simulink Parameter - bugfix Hot Plug Block Bus Detection - bugfix Hot Plug Block Ordering of Input and Output Ports - feature: Hot Plug Block Search for Variables - feature: Hot Plug Block Sort for Tasks - feature: Hot Plug Block Security with Username and Password (if in AS Project is a User added) - feature: Hot Plug Block Adding Bus Elements to Inport and/or Outport V6.2.1.48 07/07/2020 - feature: Multidimensional Array Support for Simulink.Parameter (flattened) - bugfix FUB generation: .typ file corrupted - bugfix empty space in variable name of a Simulink.Signal - bugfix FUB generation: Simulink.Parameter - bugfix different variable names for Simulink I/O and Simulink.Signal - bugfix Dimension in Bus Definition V6.2.0.43 28/05/2020 - bugfix in ConfigBlock GUI (reset of selection of Config name) - bugfix SimScape Codegeneration - bugfix Auto Transfer to real PLC - bugfix Simulink Web Interface (Subsystems) - added updated TechnologyGuard.exe V1.1.6.23 - Multidimensional Bus Elements now flattened in .typ file - new function Simulink Web Interface: multiple bus depth - support datatype STRING in B&R blocks V6.2.0.35 30/03/2020 - Support R2020a - bugfix B&R Input Block 1D-Array mismatch - new blocks for R2018a - R2020a: Extended Struct In/Out Block for selecting structures from .typ Files - Additional Files tab: Multiple selection of files - bugfix in bur_setup - additional infos in B&R comment header of generated files - added XLST files to sort XML generated files in same order than Automation Studio XML files - bugfix in relative path for Automation Studio - Enums in Busses support for Simulink I/Os and B&R Bus Input/Output blocks (also Data Dictionary support) V6.1.0 06/11/2019 - Support R2019b - No support earlier R2017a - refurbished Config block GUI - API for Config block - New Options in Config block: set Description for Task and Library, set Package for Task and Library (multiple depth) Expert Mode obsolete (always on), set Debugging flag for AS, set Preprocessing file - Option to create Simulink Parameter as AS variables - Option to create Simulink IOs as AS variables - Simulink Webview - Simulink Hot-Plug V6.0.2 - multidimensional array support for B&R Input, Output, Extended Input, Extended Output, Parameter Block - standard data types support for B&R Workspace Block - Stateflow ENUMs are generated as AS ENUMs when datatype is used in IO - bugfix for Simulink IOs as input of Environment Controller V6.0.1 - bugfix installer - bugfix multiple bus depth V6.0.0 - Important: New license mechanism and new licenses. Old licenses will not be supported. - Support Matlab R2019a - No support of Matlab Versions earlier R2016b - New installer: Installation without opening Matlab - Allow I/O Duplicates for Task - Allow I/O Duplicates for FUB resulting in VAR_IN_OUT variables in Automation Studio - New memory option 'reference' for Struct Block - Debugging option always ON for generated tasks/fubs - minor bugfixes V5.6.0 - Support Matlab R2018b - Support Data Dictionary for B&R Input, Output, Parameter, Workspace, Bus Input and Bus Output Block - Support Code Generation "Build Subsystem" - Support for standard Simulink I/O Blocks - minor bugfixes V5.5.0 - Support Matlab 2018a - Support for B&R automatic tranfer for ARSIM Version x.3x - Support for Matlab chances of External Mode - minor bugfixes - Update help V5.4.1 - Bug-Fix: Functionblock generation - B&R Parameterblock choosing bool generates Simulink Datatype boolean - Simscape Support for Matlab2017b - minor bugfixes V5.4.0 - Support Matlab 2017b - Silent Mode is available via B&R Config Block - Advanced Settings - B&R Structure Block supports Array of Structure - B&R Config Block handles the configuration of referenced models, no referenced configuration necessary anymore - minor bugfixes V5.3.1 - Missing structures for functionsblocks fixed - Support for AS 3.0.90 fixed - Enhanced structure recognition for functionblock generation - minor bugfixes V5.3.0 - Support Matlab R2017a - Enhanced function block generation - Bug fix: wrong error message for invalid Automation Studio project path corrected - Bug fix: Errors during code generation when target package contains dependencies - minor bugfixes V5.2.2 - Rework B&R Parameter Block - Rework B&R Bus Block - Rework B&R Extended Block V5.2.1 - Bug fix: Prearrangements and settings checked earlier to prohibit error messages during code generation process - Bug fix: Opening B&R Input and Output blocks doesn't cause error messages when there is no B&R configuration (block) V5.2.0 - Support Matlab R2016b - New Example for Simulink Multibody 'Steward Platform' - New helpfunction bur_setup - Parallel installation of 5.2.x with previous Automation Studio Target for Simulink Versions - No standard support for Automation Studio 3.0.81 - minor bugfixes V5.1.1 - Bug Fix: Zip Package of a model with Model Referencing - Config Block: Syntax check of version number - minor bugfixes V5.1.0 - Support Matlab R2016a - New Layout of the B&R Simulink Library Blocks - The functionality "Additional Files" supports relative paths - minor bugfixes V5.0.4 - Improved parameter check in config block - Bug Fix: FB generation - Bug Fix: Zip Package creation - Bug Fix: Warning message handling - Bug Fix: Error message handling - Bug Fix: Config-Block GUI - minor bugfixes V5.0.3 - Automatically add needed B&R standard libraries - Bug Fix: Codegeneration of a function block in an existing libary - Bug Fix: Model Referencing - Bug Fix: B&R Simulink Library V5.0.2 - supports Matlab from R2012b to R2015b - new Config Block User-Interface: model parameter setting can now be done in the Config Block V4.5.0 - Support for MATLAB 2015a - Functionblock can be added to a existing Library in Automation Studio - Simulink.Parameter and mpt.Parameter support in Workspace Variable Block - Support for B&R library guidelines compliant function block generation V4.4.1 - Bug fix Trialmode V4.4.0 Automation Studio Target for Simulink Version 4.4. supports the automatic code generation of MATLAB/Simulink 2014b as well as Simulink models using 'Model Referencing'. Thereby the time of code generation can be reduced dramatically (factor 10 to 100). Furthermore the Automation Studio Target for Simulink library has been extended around the block "Workspace Variable". The block provides the use of variables from the MATLAB workspace in generated tasks or function blocks in Automation Studio. V4.3.2 - Bug fixes V4.3.1 - Automation Studio Target for Simulink V4.3.1 supports automatic code generation from MATLAB R2014a. - Not only that, it also allows the use of reusable code for function block generation with MATLAB R2012b and higher and includes various bug fixes and other improvements. |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 6.10.0.36 | * | 10.07.2024 | 377 MB | EXE | Automation_Studio_Target_for_Simulink_6.10.0.exe | |
| Popis |
Automation Studio Target for Simulink B&R Automation Studio Target™ for Simulink provides an easy-to-use but powerful solution for implementing advanced closed-loop controllers on B&R hardware. Providing an additional Simulink blockset for variable and parameter exchange, B&R Automation Studio™ Target for Simulink supports the whole range of B&R hardware for integrated automation. At the push of a button, source code optimized for B&R target systems is generated and automatically embedded into an Automation Studio™ project. Standard variable interfaces guarantee real-time data exchange between automatically generated programs and parallel tasks. Revision history: V6.10.0 04/06/2024 - Support R2024a V6.9.1 21/05/2024 - bugfix multi level bus depth in Ext. Struct In Block - bugfix WebInterface: added exceptions for some non usable blocks added - security update: usage of TechnologyGuarding - security update: install directory V6.9.0 20/12/2023 - Support R2023b - Support Array of Buses in Hotplug Interface V6.8.0 24/03/2022 - Support R2023a - bugfix Automatic Transfer on real PLC V6.7.1 30/11/2022 - bugfix Sim.Signals in Combination with Sim I/Os V6.7.0 14/10/2022 - Support R2022b - Support Automation Studio 4.12 - feature Simulink Web Interface: Stateflow support - bugfix Sim I/Os for generating code for referenced models V6.6.1 18/07/2022 - bugfix Automatic Transfer on ArSim - bugfix Config selection in B&R Config Block GUI - updated blocks in B&R demos with PID controller V6.6.0 25/4/2022 - Support R2022a - Support Automation Studio 4.11 V6.5.1 2/12/2021 - Support R2021b - EULA page included into installer - feature Simulink Web Interface: Simulink.Signal support - feature Simulink Web Interface: Simulink.Signal as Bus support - feature Simulink Web Interface: Depth for Subsystems and referenced models - feature Create Simulink.Parameter: Bus support - bugfix Create Simulink I/Os and Create Simulink.Parameter: stable build process for referenced models V6.4.2 30/07/2021 - bugfix Simulink Web Interface for Enums in Busses and Array of Busses - bugfix B&R Extended I/Os when variables are used as parameter V6.4.1 23/04/2021 - Added error message in Config Block if AS project is in numerically named folder - bugfix change cycle time for APC2200 - bugfix create Simulink.Parameter for SimScape model - bugfix External Mode for SimScape model V6.4.0 19/03/2021 - Support R2021a - Support stop for below R2018a - Codecompletion for B&R Config Block API - bugfix B&R Config Block Opening GUI on older MATLAB versions V6.3.1 15/12/2020 - feature Hot Plug Block: multiple Instances allowed - feature Hot Plug Block: new refresh factor editfield in GUI for setting update time - bugfix Hot Plug Block: if datatype is string, no error is thrown but a warning - bugfix Package field in B&R Config Block: SSC_includes is copied in root folder now - bugfix multidimensions in B&R Parameter block - bugfix B&R Config Block: now all 8 task classes are chooseable - bugfix B&R Config Block: ode1be solver now chooseable V6.3.0.68 30/10/2020 - Support R2020b - bugfix Hot Plug Block: Bus Element Variables not shown when declared as global - bugfix empty spaces in Bus Element Comments in .typ file not shown when generated as function block - german documentation revised - added SimScape pre-built library for faster compilation in AS project V6.2.2.59 28/08/2020 - bugfix Simulink I/Os - bugfix Simulink Parameter - bugfix Hot Plug Block Bus Detection - bugfix Hot Plug Block Ordering of Input and Output Ports - feature: Hot Plug Block Search for Variables - feature: Hot Plug Block Sort for Tasks - feature: Hot Plug Block Security with Username and Password (if in AS Project is a User added) - feature: Hot Plug Block Adding Bus Elements to Inport and/or Outport V6.2.1.48 07/07/2020 - feature: Multidimensional Array Support for Simulink.Parameter (flattened) - bugfix FUB generation: .typ file corrupted - bugfix empty space in variable name of a Simulink.Signal - bugfix FUB generation: Simulink.Parameter - bugfix different variable names for Simulink I/O and Simulink.Signal - bugfix Dimension in Bus Definition V6.2.0.43 28/05/2020 - bugfix in ConfigBlock GUI (reset of selection of Config name) - bugfix SimScape Codegeneration - bugfix Auto Transfer to real PLC - bugfix Simulink Web Interface (Subsystems) - added updated TechnologyGuard.exe V1.1.6.23 - Multidimensional Bus Elements now flattened in .typ file - new function Simulink Web Interface: multiple bus depth - support datatype STRING in B&R blocks V6.2.0.35 30/03/2020 - Support R2020a - bugfix B&R Input Block 1D-Array mismatch - new blocks for R2018a - R2020a: Extended Struct In/Out Block for selecting structures from .typ Files - Additional Files tab: Multiple selection of files - bugfix in bur_setup - additional infos in B&R comment header of generated files - added XLST files to sort XML generated files in same order than Automation Studio XML files - bugfix in relative path for Automation Studio - Enums in Busses support for Simulink I/Os and B&R Bus Input/Output blocks (also Data Dictionary support) V6.1.0 06/11/2019 - Support R2019b - No support earlier R2017a - refurbished Config block GUI - API for Config block - New Options in Config block: set Description for Task and Library, set Package for Task and Library (multiple depth) Expert Mode obsolete (always on), set Debugging flag for AS, set Preprocessing file - Option to create Simulink Parameter as AS variables - Option to create Simulink IOs as AS variables - Simulink Webview - Simulink Hot-Plug V6.0.2 - multidimensional array support for B&R Input, Output, Extended Input, Extended Output, Parameter Block - standard data types support for B&R Workspace Block - Stateflow ENUMs are generated as AS ENUMs when datatype is used in IO - bugfix for Simulink IOs as input of Environment Controller V6.0.1 - bugfix installer - bugfix multiple bus depth V6.0.0 - Important: New license mechanism and new licenses. Old licenses will not be supported. - Support Matlab R2019a - No support of Matlab Versions earlier R2016b - New installer: Installation without opening Matlab - Allow I/O Duplicates for Task - Allow I/O Duplicates for FUB resulting in VAR_IN_OUT variables in Automation Studio - New memory option 'reference' for Struct Block - Debugging option always ON for generated tasks/fubs - minor bugfixes V5.6.0 - Support Matlab R2018b - Support Data Dictionary for B&R Input, Output, Parameter, Workspace, Bus Input and Bus Output Block - Support Code Generation "Build Subsystem" - Support for standard Simulink I/O Blocks - minor bugfixes V5.5.0 - Support Matlab 2018a - Support for B&R automatic tranfer for ARSIM Version x.3x - Support for Matlab chances of External Mode - minor bugfixes - Update help V5.4.1 - Bug-Fix: Functionblock generation - B&R Parameterblock choosing bool generates Simulink Datatype boolean - Simscape Support for Matlab2017b - minor bugfixes V5.4.0 - Support Matlab 2017b - Silent Mode is available via B&R Config Block - Advanced Settings - B&R Structure Block supports Array of Structure - B&R Config Block handles the configuration of referenced models, no referenced configuration necessary anymore - minor bugfixes V5.3.1 - Missing structures for functionsblocks fixed - Support for AS 3.0.90 fixed - Enhanced structure recognition for functionblock generation - minor bugfixes V5.3.0 - Support Matlab R2017a - Enhanced function block generation - Bug fix: wrong error message for invalid Automation Studio project path corrected - Bug fix: Errors during code generation when target package contains dependencies - minor bugfixes V5.2.2 - Rework B&R Parameter Block - Rework B&R Bus Block - Rework B&R Extended Block V5.2.1 - Bug fix: Prearrangements and settings checked earlier to prohibit error messages during code generation process - Bug fix: Opening B&R Input and Output blocks doesn't cause error messages when there is no B&R configuration (block) V5.2.0 - Support Matlab R2016b - New Example for Simulink Multibody 'Steward Platform' - New helpfunction bur_setup - Parallel installation of 5.2.x with previous Automation Studio Target for Simulink Versions - No standard support for Automation Studio 3.0.81 - minor bugfixes V5.1.1 - Bug Fix: Zip Package of a model with Model Referencing - Config Block: Syntax check of version number - minor bugfixes V5.1.0 - Support Matlab R2016a - New Layout of the B&R Simulink Library Blocks - The functionality "Additional Files" supports relative paths - minor bugfixes V5.0.4 - Improved parameter check in config block - Bug Fix: FB generation - Bug Fix: Zip Package creation - Bug Fix: Warning message handling - Bug Fix: Error message handling - Bug Fix: Config-Block GUI - minor bugfixes V5.0.3 - Automatically add needed B&R standard libraries - Bug Fix: Codegeneration of a function block in an existing libary - Bug Fix: Model Referencing - Bug Fix: B&R Simulink Library V5.0.2 - supports Matlab from R2012b to R2015b - new Config Block User-Interface: model parameter setting can now be done in the Config Block V4.5.0 - Support for MATLAB 2015a - Functionblock can be added to a existing Library in Automation Studio - Simulink.Parameter and mpt.Parameter support in Workspace Variable Block - Support for B&R library guidelines compliant function block generation V4.4.1 - Bug fix Trialmode V4.4.0 Automation Studio Target for Simulink Version 4.4. supports the automatic code generation of MATLAB/Simulink 2014b as well as Simulink models using 'Model Referencing'. Thereby the time of code generation can be reduced dramatically (factor 10 to 100). Furthermore the Automation Studio Target for Simulink library has been extended around the block "Workspace Variable". The block provides the use of variables from the MATLAB workspace in generated tasks or function blocks in Automation Studio. V4.3.2 - Bug fixes V4.3.1 - Automation Studio Target for Simulink V4.3.1 supports automatic code generation from MATLAB R2014a. - Not only that, it also allows the use of reusable code for function block generation with MATLAB R2012b and higher and includes various bug fixes and other improvements. |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 6.9.1.34 | * | 11.06.2024 | 376 MB | EXE | Automation_Studio_Target_for_Simulink_6.9.1.exe | |
| Popis |
Automation Studio Target for Simulink B&R Automation Studio Target™ for Simulink provides an easy-to-use but powerful solution for implementing advanced closed-loop controllers on B&R hardware. Providing an additional Simulink blockset for variable and parameter exchange, B&R Automation Studio™ Target for Simulink supports the whole range of B&R hardware for integrated automation. At the push of a button, source code optimized for B&R target systems is generated and automatically embedded into an Automation Studio™ project. Standard variable interfaces guarantee real-time data exchange between automatically generated programs and parallel tasks. Revision history: V6.9.1 21/05/2024 - bugfix multi level bus depth in Ext. Struct In Block - bugfix WebInterface: added exceptions for some non usable blocks added - security update: usage of TechnologyGuarding - security update: install directory V6.9.0 20/12/2023 - Support R2023b - Support Array of Buses in Hotplug Interface V6.8.0 24/03/2022 - Support R2023a - bugfix Automatic Transfer on real PLC V6.7.1 30/11/2022 - bugfix Sim.Signals in Combination with Sim I/Os V6.7.0 14/10/2022 - Support R2022b - Support Automation Studio 4.12 - feature Simulink Web Interface: Stateflow support - bugfix Sim I/Os for generating code for referenced models V6.6.1 18/07/2022 - bugfix Automatic Transfer on ArSim - bugfix Config selection in B&R Config Block GUI - updated blocks in B&R demos with PID controller V6.6.0 25/4/2022 - Support R2022a - Support Automation Studio 4.11 V6.5.1 2/12/2021 - Support R2021b - EULA page included into installer - feature Simulink Web Interface: Simulink.Signal support - feature Simulink Web Interface: Simulink.Signal as Bus support - feature Simulink Web Interface: Depth for Subsystems and referenced models - feature Create Simulink.Parameter: Bus support - bugfix Create Simulink I/Os and Create Simulink.Parameter: stable build process for referenced models V6.4.2 30/07/2021 - bugfix Simulink Web Interface for Enums in Busses and Array of Busses - bugfix B&R Extended I/Os when variables are used as parameter V6.4.1 23/04/2021 - Added error message in Config Block if AS project is in numerically named folder - bugfix change cycle time for APC2200 - bugfix create Simulink.Parameter for SimScape model - bugfix External Mode for SimScape model V6.4.0 19/03/2021 - Support R2021a - Support stop for below R2018a - Codecompletion for B&R Config Block API - bugfix B&R Config Block Opening GUI on older MATLAB versions V6.3.1 15/12/2020 - feature Hot Plug Block: multiple Instances allowed - feature Hot Plug Block: new refresh factor editfield in GUI for setting update time - bugfix Hot Plug Block: if datatype is string, no error is thrown but a warning - bugfix Package field in B&R Config Block: SSC_includes is copied in root folder now - bugfix multidimensions in B&R Parameter block - bugfix B&R Config Block: now all 8 task classes are chooseable - bugfix B&R Config Block: ode1be solver now chooseable V6.3.0.68 30/10/2020 - Support R2020b - bugfix Hot Plug Block: Bus Element Variables not shown when declared as global - bugfix empty spaces in Bus Element Comments in .typ file not shown when generated as function block - german documentation revised - added SimScape pre-built library for faster compilation in AS project V6.2.2.59 28/08/2020 - bugfix Simulink I/Os - bugfix Simulink Parameter - bugfix Hot Plug Block Bus Detection - bugfix Hot Plug Block Ordering of Input and Output Ports - feature: Hot Plug Block Search for Variables - feature: Hot Plug Block Sort for Tasks - feature: Hot Plug Block Security with Username and Password (if in AS Project is a User added) - feature: Hot Plug Block Adding Bus Elements to Inport and/or Outport V6.2.1.48 07/07/2020 - feature: Multidimensional Array Support for Simulink.Parameter (flattened) - bugfix FUB generation: .typ file corrupted - bugfix empty space in variable name of a Simulink.Signal - bugfix FUB generation: Simulink.Parameter - bugfix different variable names for Simulink I/O and Simulink.Signal - bugfix Dimension in Bus Definition V6.2.0.43 28/05/2020 - bugfix in ConfigBlock GUI (reset of selection of Config name) - bugfix SimScape Codegeneration - bugfix Auto Transfer to real PLC - bugfix Simulink Web Interface (Subsystems) - added updated TechnologyGuard.exe V1.1.6.23 - Multidimensional Bus Elements now flattened in .typ file - new function Simulink Web Interface: multiple bus depth - support datatype STRING in B&R blocks V6.2.0.35 30/03/2020 - Support R2020a - bugfix B&R Input Block 1D-Array mismatch - new blocks for R2018a - R2020a: Extended Struct In/Out Block for selecting structures from .typ Files - Additional Files tab: Multiple selection of files - bugfix in bur_setup - additional infos in B&R comment header of generated files - added XLST files to sort XML generated files in same order than Automation Studio XML files - bugfix in relative path for Automation Studio - Enums in Busses support for Simulink I/Os and B&R Bus Input/Output blocks (also Data Dictionary support) V6.1.0 06/11/2019 - Support R2019b - No support earlier R2017a - refurbished Config block GUI - API for Config block - New Options in Config block: set Description for Task and Library, set Package for Task and Library (multiple depth) Expert Mode obsolete (always on), set Debugging flag for AS, set Preprocessing file - Option to create Simulink Parameter as AS variables - Option to create Simulink IOs as AS variables - Simulink Webview - Simulink Hot-Plug V6.0.2 - multidimensional array support for B&R Input, Output, Extended Input, Extended Output, Parameter Block - standard data types support for B&R Workspace Block - Stateflow ENUMs are generated as AS ENUMs when datatype is used in IO - bugfix for Simulink IOs as input of Environment Controller V6.0.1 - bugfix installer - bugfix multiple bus depth V6.0.0 - Important: New license mechanism and new licenses. Old licenses will not be supported. - Support Matlab R2019a - No support of Matlab Versions earlier R2016b - New installer: Installation without opening Matlab - Allow I/O Duplicates for Task - Allow I/O Duplicates for FUB resulting in VAR_IN_OUT variables in Automation Studio - New memory option 'reference' for Struct Block - Debugging option always ON for generated tasks/fubs - minor bugfixes V5.6.0 - Support Matlab R2018b - Support Data Dictionary for B&R Input, Output, Parameter, Workspace, Bus Input and Bus Output Block - Support Code Generation "Build Subsystem" - Support for standard Simulink I/O Blocks - minor bugfixes V5.5.0 - Support Matlab 2018a - Support for B&R automatic tranfer for ARSIM Version x.3x - Support for Matlab chances of External Mode - minor bugfixes - Update help V5.4.1 - Bug-Fix: Functionblock generation - B&R Parameterblock choosing bool generates Simulink Datatype boolean - Simscape Support for Matlab2017b - minor bugfixes V5.4.0 - Support Matlab 2017b - Silent Mode is available via B&R Config Block - Advanced Settings - B&R Structure Block supports Array of Structure - B&R Config Block handles the configuration of referenced models, no referenced configuration necessary anymore - minor bugfixes V5.3.1 - Missing structures for functionsblocks fixed - Support for AS 3.0.90 fixed - Enhanced structure recognition for functionblock generation - minor bugfixes V5.3.0 - Support Matlab R2017a - Enhanced function block generation - Bug fix: wrong error message for invalid Automation Studio project path corrected - Bug fix: Errors during code generation when target package contains dependencies - minor bugfixes V5.2.2 - Rework B&R Parameter Block - Rework B&R Bus Block - Rework B&R Extended Block V5.2.1 - Bug fix: Prearrangements and settings checked earlier to prohibit error messages during code generation process - Bug fix: Opening B&R Input and Output blocks doesn't cause error messages when there is no B&R configuration (block) V5.2.0 - Support Matlab R2016b - New Example for Simulink Multibody 'Steward Platform' - New helpfunction bur_setup - Parallel installation of 5.2.x with previous Automation Studio Target for Simulink Versions - No standard support for Automation Studio 3.0.81 - minor bugfixes V5.1.1 - Bug Fix: Zip Package of a model with Model Referencing - Config Block: Syntax check of version number - minor bugfixes V5.1.0 - Support Matlab R2016a - New Layout of the B&R Simulink Library Blocks - The functionality "Additional Files" supports relative paths - minor bugfixes V5.0.4 - Improved parameter check in config block - Bug Fix: FB generation - Bug Fix: Zip Package creation - Bug Fix: Warning message handling - Bug Fix: Error message handling - Bug Fix: Config-Block GUI - minor bugfixes V5.0.3 - Automatically add needed B&R standard libraries - Bug Fix: Codegeneration of a function block in an existing libary - Bug Fix: Model Referencing - Bug Fix: B&R Simulink Library V5.0.2 - supports Matlab from R2012b to R2015b - new Config Block User-Interface: model parameter setting can now be done in the Config Block V4.5.0 - Support for MATLAB 2015a - Functionblock can be added to a existing Library in Automation Studio - Simulink.Parameter and mpt.Parameter support in Workspace Variable Block - Support for B&R library guidelines compliant function block generation V4.4.1 - Bug fix Trialmode V4.4.0 Automation Studio Target for Simulink Version 4.4. supports the automatic code generation of MATLAB/Simulink 2014b as well as Simulink models using 'Model Referencing'. Thereby the time of code generation can be reduced dramatically (factor 10 to 100). Furthermore the Automation Studio Target for Simulink library has been extended around the block "Workspace Variable". The block provides the use of variables from the MATLAB workspace in generated tasks or function blocks in Automation Studio. V4.3.2 - Bug fixes V4.3.1 - Automation Studio Target for Simulink V4.3.1 supports automatic code generation from MATLAB R2014a. - Not only that, it also allows the use of reusable code for function block generation with MATLAB R2012b and higher and includes various bug fixes and other improvements. |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 6.9.0.21 | * | 22.01.2024 | 377 MB | EXE | Automation_Studio_Target_for_Simulink_6.9.0.exe | |
| Popis |
Automation Studio Target for Simulink B&R Automation Studio Target™ for Simulink provides an easy-to-use but powerful solution for implementing advanced closed-loop controllers on B&R hardware. Providing an additional Simulink blockset for variable and parameter exchange, B&R Automation Studio™ Target for Simulink supports the whole range of B&R hardware for integrated automation. At the push of a button, source code optimized for B&R target systems is generated and automatically embedded into an Automation Studio™ project. Standard variable interfaces guarantee real-time data exchange between automatically generated programs and parallel tasks. Revision history: V6.9.0 20/12/2023 - Support R2023b - Support Array of Buses in Hotplug Interface V6.8.0 24/03/2022 - Support R2023a - bugfix Automatic Transfer on real PLC V6.7.1 30/11/2022 - bugfix Sim.Signals in Combination with Sim I/Os V6.7.0 14/10/2022 - Support R2022b - Support Automation Studio 4.12 - feature Simulink Web Interface: Stateflow support - bugfix Sim I/Os for generating code for referenced models V6.6.1 18/07/2022 - bugfix Automatic Transfer on ArSim - bugfix Config selection in B&R Config Block GUI - updated blocks in B&R demos with PID controller V6.6.0 25/4/2022 - Support R2022a - Support Automation Studio 4.11 V6.5.1 2/12/2021 - Support R2021b - EULA page included into installer - feature Simulink Web Interface: Simulink.Signal support - feature Simulink Web Interface: Simulink.Signal as Bus support - feature Simulink Web Interface: Depth for Subsystems and referenced models - feature Create Simulink.Parameter: Bus support - bugfix Create Simulink I/Os and Create Simulink.Parameter: stable build process for referenced models V6.4.2 30/07/2021 - bugfix Simulink Web Interface for Enums in Busses and Array of Busses - bugfix B&R Extended I/Os when variables are used as parameter V6.4.1 23/04/2021 - Added error message in Config Block if AS project is in numerically named folder - bugfix change cycle time for APC2200 - bugfix create Simulink.Parameter for SimScape model - bugfix External Mode for SimScape model V6.4.0 19/03/2021 - Support R2021a - Support stop for below R2018a - Codecompletion for B&R Config Block API - bugfix B&R Config Block Opening GUI on older MATLAB versions V6.3.1 15/12/2020 - feature Hot Plug Block: multiple Instances allowed - feature Hot Plug Block: new refresh factor editfield in GUI for setting update time - bugfix Hot Plug Block: if datatype is string, no error is thrown but a warning - bugfix Package field in B&R Config Block: SSC_includes is copied in root folder now - bugfix multidimensions in B&R Parameter block - bugfix B&R Config Block: now all 8 task classes are chooseable - bugfix B&R Config Block: ode1be solver now chooseable V6.3.0.68 30/10/2020 - Support R2020b - bugfix Hot Plug Block: Bus Element Variables not shown when declared as global - bugfix empty spaces in Bus Element Comments in .typ file not shown when generated as function block - german documentation revised - added SimScape pre-built library for faster compilation in AS project V6.2.2.59 28/08/2020 - bugfix Simulink I/Os - bugfix Simulink Parameter - bugfix Hot Plug Block Bus Detection - bugfix Hot Plug Block Ordering of Input and Output Ports - feature: Hot Plug Block Search for Variables - feature: Hot Plug Block Sort for Tasks - feature: Hot Plug Block Security with Username and Password (if in AS Project is a User added) - feature: Hot Plug Block Adding Bus Elements to Inport and/or Outport V6.2.1.48 07/07/2020 - feature: Multidimensional Array Support for Simulink.Parameter (flattened) - bugfix FUB generation: .typ file corrupted - bugfix empty space in variable name of a Simulink.Signal - bugfix FUB generation: Simulink.Parameter - bugfix different variable names for Simulink I/O and Simulink.Signal - bugfix Dimension in Bus Definition V6.2.0.43 28/05/2020 - bugfix in ConfigBlock GUI (reset of selection of Config name) - bugfix SimScape Codegeneration - bugfix Auto Transfer to real PLC - bugfix Simulink Web Interface (Subsystems) - added updated TechnologyGuard.exe V1.1.6.23 - Multidimensional Bus Elements now flattened in .typ file - new function Simulink Web Interface: multiple bus depth - support datatype STRING in B&R blocks V6.2.0.35 30/03/2020 - Support R2020a - bugfix B&R Input Block 1D-Array mismatch - new blocks for R2018a - R2020a: Extended Struct In/Out Block for selecting structures from .typ Files - Additional Files tab: Multiple selection of files - bugfix in bur_setup - additional infos in B&R comment header of generated files - added XLST files to sort XML generated files in same order than Automation Studio XML files - bugfix in relative path for Automation Studio - Enums in Busses support for Simulink I/Os and B&R Bus Input/Output blocks (also Data Dictionary support) V6.1.0 06/11/2019 - Support R2019b - No support earlier R2017a - refurbished Config block GUI - API for Config block - New Options in Config block: set Description for Task and Library, set Package for Task and Library (multiple depth) Expert Mode obsolete (always on), set Debugging flag for AS, set Preprocessing file - Option to create Simulink Parameter as AS variables - Option to create Simulink IOs as AS variables - Simulink Webview - Simulink Hot-Plug V6.0.2 - multidimensional array support for B&R Input, Output, Extended Input, Extended Output, Parameter Block - standard data types support for B&R Workspace Block - Stateflow ENUMs are generated as AS ENUMs when datatype is used in IO - bugfix for Simulink IOs as input of Environment Controller V6.0.1 - bugfix installer - bugfix multiple bus depth V6.0.0 - Important: New license mechanism and new licenses. Old licenses will not be supported. - Support Matlab R2019a - No support of Matlab Versions earlier R2016b - New installer: Installation without opening Matlab - Allow I/O Duplicates for Task - Allow I/O Duplicates for FUB resulting in VAR_IN_OUT variables in Automation Studio - New memory option 'reference' for Struct Block - Debugging option always ON for generated tasks/fubs - minor bugfixes V5.6.0 - Support Matlab R2018b - Support Data Dictionary for B&R Input, Output, Parameter, Workspace, Bus Input and Bus Output Block - Support Code Generation "Build Subsystem" - Support for standard Simulink I/O Blocks - minor bugfixes V5.5.0 - Support Matlab 2018a - Support for B&R automatic tranfer for ARSIM Version x.3x - Support for Matlab chances of External Mode - minor bugfixes - Update help V5.4.1 - Bug-Fix: Functionblock generation - B&R Parameterblock choosing bool generates Simulink Datatype boolean - Simscape Support for Matlab2017b - minor bugfixes V5.4.0 - Support Matlab 2017b - Silent Mode is available via B&R Config Block - Advanced Settings - B&R Structure Block supports Array of Structure - B&R Config Block handles the configuration of referenced models, no referenced configuration necessary anymore - minor bugfixes V5.3.1 - Missing structures for functionsblocks fixed - Support for AS 3.0.90 fixed - Enhanced structure recognition for functionblock generation - minor bugfixes V5.3.0 - Support Matlab R2017a - Enhanced function block generation - Bug fix: wrong error message for invalid Automation Studio project path corrected - Bug fix: Errors during code generation when target package contains dependencies - minor bugfixes V5.2.2 - Rework B&R Parameter Block - Rework B&R Bus Block - Rework B&R Extended Block V5.2.1 - Bug fix: Prearrangements and settings checked earlier to prohibit error messages during code generation process - Bug fix: Opening B&R Input and Output blocks doesn't cause error messages when there is no B&R configuration (block) V5.2.0 - Support Matlab R2016b - New Example for Simulink Multibody 'Steward Platform' - New helpfunction bur_setup - Parallel installation of 5.2.x with previous Automation Studio Target for Simulink Versions - No standard support for Automation Studio 3.0.81 - minor bugfixes V5.1.1 - Bug Fix: Zip Package of a model with Model Referencing - Config Block: Syntax check of version number - minor bugfixes V5.1.0 - Support Matlab R2016a - New Layout of the B&R Simulink Library Blocks - The functionality "Additional Files" supports relative paths - minor bugfixes V5.0.4 - Improved parameter check in config block - Bug Fix: FB generation - Bug Fix: Zip Package creation - Bug Fix: Warning message handling - Bug Fix: Error message handling - Bug Fix: Config-Block GUI - minor bugfixes V5.0.3 - Automatically add needed B&R standard libraries - Bug Fix: Codegeneration of a function block in an existing libary - Bug Fix: Model Referencing - Bug Fix: B&R Simulink Library V5.0.2 - supports Matlab from R2012b to R2015b - new Config Block User-Interface: model parameter setting can now be done in the Config Block V4.5.0 - Support for MATLAB 2015a - Functionblock can be added to a existing Library in Automation Studio - Simulink.Parameter and mpt.Parameter support in Workspace Variable Block - Support for B&R library guidelines compliant function block generation V4.4.1 - Bug fix Trialmode V4.4.0 Automation Studio Target for Simulink Version 4.4. supports the automatic code generation of MATLAB/Simulink 2014b as well as Simulink models using 'Model Referencing'. Thereby the time of code generation can be reduced dramatically (factor 10 to 100). Furthermore the Automation Studio Target for Simulink library has been extended around the block "Workspace Variable". The block provides the use of variables from the MATLAB workspace in generated tasks or function blocks in Automation Studio. V4.3.2 - Bug fixes V4.3.1 - Automation Studio Target for Simulink V4.3.1 supports automatic code generation from MATLAB R2014a. - Not only that, it also allows the use of reusable code for function block generation with MATLAB R2012b and higher and includes various bug fixes and other improvements. |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 6.8.0.16 | * | 24.05.2023 | 324 MB | EXE | Automation_Studio_Target_for_Simulink_6.8.0.exe | |
| Popis |
Automation Studio Target for Simulink B&R Automation Studio Target™ for Simulink provides an easy-to-use but powerful solution for implementing advanced closed-loop controllers on B&R hardware. Providing an additional Simulink blockset for variable and parameter exchange, B&R Automation Studio™ Target for Simulink supports the whole range of B&R hardware for integrated automation. At the push of a button, source code optimized for B&R target systems is generated and automatically embedded into an Automation Studio™ project. Standard variable interfaces guarantee real-time data exchange between automatically generated programs and parallel tasks. Revision history: V6.8.0 24/03/2022 - Support R2023a - bugfix Automatic Transfer on real PLC V6.7.1 30/11/2022 - bugfix Sim.Signals in Combination with Sim I/Os V6.7.0 14/10/2022 - Support R2022b - Support Automation Studio 4.12 - feature Simulink Web Interface: Stateflow support - bugfix Sim I/Os for generating code for referenced models V6.6.1 18/07/2022 - bugfix Automatic Transfer on ArSim - bugfix Config selection in B&R Config Block GUI - updated blocks in B&R demos with PID controller V6.6.0 25/4/2022 - Support R2022a - Support Automation Studio 4.11 V6.5.1 2/12/2021 - Support R2021b - EULA page included into installer - feature Simulink Web Interface: Simulink.Signal support - feature Simulink Web Interface: Simulink.Signal as Bus support - feature Simulink Web Interface: Depth for Subsystems and referenced models - feature Create Simulink.Parameter: Bus support - bugfix Create Simulink I/Os and Create Simulink.Parameter: stable build process for referenced models V6.4.2 30/07/2021 - bugfix Simulink Web Interface for Enums in Busses and Array of Busses - bugfix B&R Extended I/Os when variables are used as parameter V6.4.1 23/04/2021 - Added error message in Config Block if AS project is in numerically named folder - bugfix change cycle time for APC2200 - bugfix create Simulink.Parameter for SimScape model - bugfix External Mode for SimScape model V6.4.0 19/03/2021 - Support R2021a - Support stop for below R2018a - Codecompletion for B&R Config Block API - bugfix B&R Config Block Opening GUI on older MATLAB versions V6.3.1 15/12/2020 - feature Hot Plug Block: multiple Instances allowed - feature Hot Plug Block: new refresh factor editfield in GUI for setting update time - bugfix Hot Plug Block: if datatype is string, no error is thrown but a warning - bugfix Package field in B&R Config Block: SSC_includes is copied in root folder now - bugfix multidimensions in B&R Parameter block - bugfix B&R Config Block: now all 8 task classes are chooseable - bugfix B&R Config Block: ode1be solver now chooseable V6.3.0.68 30/10/2020 - Support R2020b - bugfix Hot Plug Block: Bus Element Variables not shown when declared as global - bugfix empty spaces in Bus Element Comments in .typ file not shown when generated as function block - german documentation revised - added SimScape pre-built library for faster compilation in AS project V6.2.2.59 28/08/2020 - bugfix Simulink I/Os - bugfix Simulink Parameter - bugfix Hot Plug Block Bus Detection - bugfix Hot Plug Block Ordering of Input and Output Ports - feature: Hot Plug Block Search for Variables - feature: Hot Plug Block Sort for Tasks - feature: Hot Plug Block Security with Username and Password (if in AS Project is a User added) - feature: Hot Plug Block Adding Bus Elements to Inport and/or Outport V6.2.1.48 07/07/2020 - feature: Multidimensional Array Support for Simulink.Parameter (flattened) - bugfix FUB generation: .typ file corrupted - bugfix empty space in variable name of a Simulink.Signal - bugfix FUB generation: Simulink.Parameter - bugfix different variable names for Simulink I/O and Simulink.Signal - bugfix Dimension in Bus Definition V6.2.0.43 28/05/2020 - bugfix in ConfigBlock GUI (reset of selection of Config name) - bugfix SimScape Codegeneration - bugfix Auto Transfer to real PLC - bugfix Simulink Web Interface (Subsystems) - added updated TechnologyGuard.exe V1.1.6.23 - Multidimensional Bus Elements now flattened in .typ file - new function Simulink Web Interface: multiple bus depth - support datatype STRING in B&R blocks V6.2.0.35 30/03/2020 - Support R2020a - bugfix B&R Input Block 1D-Array mismatch - new blocks for R2018a - R2020a: Extended Struct In/Out Block for selecting structures from .typ Files - Additional Files tab: Multiple selection of files - bugfix in bur_setup - additional infos in B&R comment header of generated files - added XLST files to sort XML generated files in same order than Automation Studio XML files - bugfix in relative path for Automation Studio - Enums in Busses support for Simulink I/Os and B&R Bus Input/Output blocks (also Data Dictionary support) V6.1.0 06/11/2019 - Support R2019b - No support earlier R2017a - refurbished Config block GUI - API for Config block - New Options in Config block: set Description for Task and Library, set Package for Task and Library (multiple depth) Expert Mode obsolete (always on), set Debugging flag for AS, set Preprocessing file - Option to create Simulink Parameter as AS variables - Option to create Simulink IOs as AS variables - Simulink Webview - Simulink Hot-Plug V6.0.2 - multidimensional array support for B&R Input, Output, Extended Input, Extended Output, Parameter Block - standard data types support for B&R Workspace Block - Stateflow ENUMs are generated as AS ENUMs when datatype is used in IO - bugfix for Simulink IOs as input of Environment Controller V6.0.1 - bugfix installer - bugfix multiple bus depth V6.0.0 - Important: New license mechanism and new licenses. Old licenses will not be supported. - Support Matlab R2019a - No support of Matlab Versions earlier R2016b - New installer: Installation without opening Matlab - Allow I/O Duplicates for Task - Allow I/O Duplicates for FUB resulting in VAR_IN_OUT variables in Automation Studio - New memory option 'reference' for Struct Block - Debugging option always ON for generated tasks/fubs - minor bugfixes V5.6.0 - Support Matlab R2018b - Support Data Dictionary for B&R Input, Output, Parameter, Workspace, Bus Input and Bus Output Block - Support Code Generation "Build Subsystem" - Support for standard Simulink I/O Blocks - minor bugfixes V5.5.0 - Support Matlab 2018a - Support for B&R automatic tranfer for ARSIM Version x.3x - Support for Matlab chances of External Mode - minor bugfixes - Update help V5.4.1 - Bug-Fix: Functionblock generation - B&R Parameterblock choosing bool generates Simulink Datatype boolean - Simscape Support for Matlab2017b - minor bugfixes V5.4.0 - Support Matlab 2017b - Silent Mode is available via B&R Config Block - Advanced Settings - B&R Structure Block supports Array of Structure - B&R Config Block handles the configuration of referenced models, no referenced configuration necessary anymore - minor bugfixes V5.3.1 - Missing structures for functionsblocks fixed - Support for AS 3.0.90 fixed - Enhanced structure recognition for functionblock generation - minor bugfixes V5.3.0 - Support Matlab R2017a - Enhanced function block generation - Bug fix: wrong error message for invalid Automation Studio project path corrected - Bug fix: Errors during code generation when target package contains dependencies - minor bugfixes V5.2.2 - Rework B&R Parameter Block - Rework B&R Bus Block - Rework B&R Extended Block V5.2.1 - Bug fix: Prearrangements and settings checked earlier to prohibit error messages during code generation process - Bug fix: Opening B&R Input and Output blocks doesn't cause error messages when there is no B&R configuration (block) V5.2.0 - Support Matlab R2016b - New Example for Simulink Multibody 'Steward Platform' - New helpfunction bur_setup - Parallel installation of 5.2.x with previous Automation Studio Target for Simulink Versions - No standard support for Automation Studio 3.0.81 - minor bugfixes V5.1.1 - Bug Fix: Zip Package of a model with Model Referencing - Config Block: Syntax check of version number - minor bugfixes V5.1.0 - Support Matlab R2016a - New Layout of the B&R Simulink Library Blocks - The functionality "Additional Files" supports relative paths - minor bugfixes V5.0.4 - Improved parameter check in config block - Bug Fix: FB generation - Bug Fix: Zip Package creation - Bug Fix: Warning message handling - Bug Fix: Error message handling - Bug Fix: Config-Block GUI - minor bugfixes V5.0.3 - Automatically add needed B&R standard libraries - Bug Fix: Codegeneration of a function block in an existing libary - Bug Fix: Model Referencing - Bug Fix: B&R Simulink Library V5.0.2 - supports Matlab from R2012b to R2015b - new Config Block User-Interface: model parameter setting can now be done in the Config Block V4.5.0 - Support for MATLAB 2015a - Functionblock can be added to a existing Library in Automation Studio - Simulink.Parameter and mpt.Parameter support in Workspace Variable Block - Support for B&R library guidelines compliant function block generation V4.4.1 - Bug fix Trialmode V4.4.0 Automation Studio Target for Simulink Version 4.4. supports the automatic code generation of MATLAB/Simulink 2014b as well as Simulink models using 'Model Referencing'. Thereby the time of code generation can be reduced dramatically (factor 10 to 100). Furthermore the Automation Studio Target for Simulink library has been extended around the block "Workspace Variable". The block provides the use of variables from the MATLAB workspace in generated tasks or function blocks in Automation Studio. V4.3.2 - Bug fixes V4.3.1 - Automation Studio Target for Simulink V4.3.1 supports automatic code generation from MATLAB R2014a. - Not only that, it also allows the use of reusable code for function block generation with MATLAB R2012b and higher and includes various bug fixes and other improvements. |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 6.7.1.11 | * | 09.12.2022 | 254 MB | EXE | Automation_Studio_Target_for_Simulink_6.7.1.exe | |
| Popis |
Automation Studio Target for Simulink B&R Automation Studio Target™ for Simulink provides an easy-to-use but powerful solution for implementing advanced closed-loop controllers on B&R hardware. Providing an additional Simulink blockset for variable and parameter exchange, B&R Automation Studio™ Target for Simulink supports the whole range of B&R hardware for integrated automation. At the push of a button, source code optimized for B&R target systems is generated and automatically embedded into an Automation Studio™ project. Standard variable interfaces guarantee real-time data exchange between automatically generated programs and parallel tasks. Revision history: V6.7.1 30/11/2022 - bugfix Sim.Signals in Combination with Sim I/Os V6.7.0 14/10/2022 - Support R2022b - Support Automation Studio 4.12 - feature Simulink Web Interface: Stateflow support - bugfix Sim I/Os for generating code for referenced models V6.6.1 18/07/2022 - bugfix Automatic Transfer on ArSim - bugfix Config selection in B&R Config Block GUI - updated blocks in B&R demos with PID controller V6.6.0 25/4/2022 - Support R2022a - Support Automation Studio 4.11 V6.5.1 2/12/2021 - Support R2021b - EULA page included into installer - feature Simulink Web Interface: Simulink.Signal support - feature Simulink Web Interface: Simulink.Signal as Bus support - feature Simulink Web Interface: Depth for Subsystems and referenced models - feature Create Simulink.Parameter: Bus support - bugfix Create Simulink I/Os and Create Simulink.Parameter: stable build process for referenced models V6.4.2 30/07/2021 - bugfix Simulink Web Interface for Enums in Busses and Array of Busses - bugfix B&R Extended I/Os when variables are used as parameter V6.4.1 23/04/2021 - Added error message in Config Block if AS project is in numerically named folder - bugfix change cycle time for APC2200 - bugfix create Simulink.Parameter for SimScape model - bugfix External Mode for SimScape model V6.4.0 19/03/2021 - Support R2021a - Support stop for below R2018a - Codecompletion for B&R Config Block API - bugfix B&R Config Block Opening GUI on older MATLAB versions V6.3.1 15/12/2020 - feature Hot Plug Block: multiple Instances allowed - feature Hot Plug Block: new refresh factor editfield in GUI for setting update time - bugfix Hot Plug Block: if datatype is string, no error is thrown but a warning - bugfix Package field in B&R Config Block: SSC_includes is copied in root folder now - bugfix multidimensions in B&R Parameter block - bugfix B&R Config Block: now all 8 task classes are chooseable - bugfix B&R Config Block: ode1be solver now chooseable V6.3.0.68 30/10/2020 - Support R2020b - bugfix Hot Plug Block: Bus Element Variables not shown when declared as global - bugfix empty spaces in Bus Element Comments in .typ file not shown when generated as function block - german documentation revised - added SimScape pre-built library for faster compilation in AS project V6.2.2.59 28/08/2020 - bugfix Simulink I/Os - bugfix Simulink Parameter - bugfix Hot Plug Block Bus Detection - bugfix Hot Plug Block Ordering of Input and Output Ports - feature: Hot Plug Block Search for Variables - feature: Hot Plug Block Sort for Tasks - feature: Hot Plug Block Security with Username and Password (if in AS Project is a User added) - feature: Hot Plug Block Adding Bus Elements to Inport and/or Outport V6.2.1.48 07/07/2020 - feature: Multidimensional Array Support for Simulink.Parameter (flattened) - bugfix FUB generation: .typ file corrupted - bugfix empty space in variable name of a Simulink.Signal - bugfix FUB generation: Simulink.Parameter - bugfix different variable names for Simulink I/O and Simulink.Signal - bugfix Dimension in Bus Definition V6.2.0.43 28/05/2020 - bugfix in ConfigBlock GUI (reset of selection of Config name) - bugfix SimScape Codegeneration - bugfix Auto Transfer to real PLC - bugfix Simulink Web Interface (Subsystems) - added updated TechnologyGuard.exe V1.1.6.23 - Multidimensional Bus Elements now flattened in .typ file - new function Simulink Web Interface: multiple bus depth - support datatype STRING in B&R blocks V6.2.0.35 30/03/2020 - Support R2020a - bugfix B&R Input Block 1D-Array mismatch - new blocks for R2018a - R2020a: Extended Struct In/Out Block for selecting structures from .typ Files - Additional Files tab: Multiple selection of files - bugfix in bur_setup - additional infos in B&R comment header of generated files - added XLST files to sort XML generated files in same order than Automation Studio XML files - bugfix in relative path for Automation Studio - Enums in Busses support for Simulink I/Os and B&R Bus Input/Output blocks (also Data Dictionary support) V6.1.0 06/11/2019 - Support R2019b - No support earlier R2017a - refurbished Config block GUI - API for Config block - New Options in Config block: set Description for Task and Library, set Package for Task and Library (multiple depth) Expert Mode obsolete (always on), set Debugging flag for AS, set Preprocessing file - Option to create Simulink Parameter as AS variables - Option to create Simulink IOs as AS variables - Simulink Webview - Simulink Hot-Plug V6.0.2 - multidimensional array support for B&R Input, Output, Extended Input, Extended Output, Parameter Block - standard data types support for B&R Workspace Block - Stateflow ENUMs are generated as AS ENUMs when datatype is used in IO - bugfix for Simulink IOs as input of Environment Controller V6.0.1 - bugfix installer - bugfix multiple bus depth V6.0.0 - Important: New license mechanism and new licenses. Old licenses will not be supported. - Support Matlab R2019a - No support of Matlab Versions earlier R2016b - New installer: Installation without opening Matlab - Allow I/O Duplicates for Task - Allow I/O Duplicates for FUB resulting in VAR_IN_OUT variables in Automation Studio - New memory option 'reference' for Struct Block - Debugging option always ON for generated tasks/fubs - minor bugfixes V5.6.0 - Support Matlab R2018b - Support Data Dictionary for B&R Input, Output, Parameter, Workspace, Bus Input and Bus Output Block - Support Code Generation "Build Subsystem" - Support for standard Simulink I/O Blocks - minor bugfixes V5.5.0 - Support Matlab 2018a - Support for B&R automatic tranfer for ARSIM Version x.3x - Support for Matlab chances of External Mode - minor bugfixes - Update help V5.4.1 - Bug-Fix: Functionblock generation - B&R Parameterblock choosing bool generates Simulink Datatype boolean - Simscape Support for Matlab2017b - minor bugfixes V5.4.0 - Support Matlab 2017b - Silent Mode is available via B&R Config Block - Advanced Settings - B&R Structure Block supports Array of Structure - B&R Config Block handles the configuration of referenced models, no referenced configuration necessary anymore - minor bugfixes V5.3.1 - Missing structures for functionsblocks fixed - Support for AS 3.0.90 fixed - Enhanced structure recognition for functionblock generation - minor bugfixes V5.3.0 - Support Matlab R2017a - Enhanced function block generation - Bug fix: wrong error message for invalid Automation Studio project path corrected - Bug fix: Errors during code generation when target package contains dependencies - minor bugfixes V5.2.2 - Rework B&R Parameter Block - Rework B&R Bus Block - Rework B&R Extended Block V5.2.1 - Bug fix: Prearrangements and settings checked earlier to prohibit error messages during code generation process - Bug fix: Opening B&R Input and Output blocks doesn't cause error messages when there is no B&R configuration (block) V5.2.0 - Support Matlab R2016b - New Example for Simulink Multibody 'Steward Platform' - New helpfunction bur_setup - Parallel installation of 5.2.x with previous Automation Studio Target for Simulink Versions - No standard support for Automation Studio 3.0.81 - minor bugfixes V5.1.1 - Bug Fix: Zip Package of a model with Model Referencing - Config Block: Syntax check of version number - minor bugfixes V5.1.0 - Support Matlab R2016a - New Layout of the B&R Simulink Library Blocks - The functionality "Additional Files" supports relative paths - minor bugfixes V5.0.4 - Improved parameter check in config block - Bug Fix: FB generation - Bug Fix: Zip Package creation - Bug Fix: Warning message handling - Bug Fix: Error message handling - Bug Fix: Config-Block GUI - minor bugfixes V5.0.3 - Automatically add needed B&R standard libraries - Bug Fix: Codegeneration of a function block in an existing libary - Bug Fix: Model Referencing - Bug Fix: B&R Simulink Library V5.0.2 - supports Matlab from R2012b to R2015b - new Config Block User-Interface: model parameter setting can now be done in the Config Block V4.5.0 - Support for MATLAB 2015a - Functionblock can be added to a existing Library in Automation Studio - Simulink.Parameter and mpt.Parameter support in Workspace Variable Block - Support for B&R library guidelines compliant function block generation V4.4.1 - Bug fix Trialmode V4.4.0 Automation Studio Target for Simulink Version 4.4. supports the automatic code generation of MATLAB/Simulink 2014b as well as Simulink models using 'Model Referencing'. Thereby the time of code generation can be reduced dramatically (factor 10 to 100). Furthermore the Automation Studio Target for Simulink library has been extended around the block "Workspace Variable". The block provides the use of variables from the MATLAB workspace in generated tasks or function blocks in Automation Studio. V4.3.2 - Bug fixes V4.3.1 - Automation Studio Target for Simulink V4.3.1 supports automatic code generation from MATLAB R2014a. - Not only that, it also allows the use of reusable code for function block generation with MATLAB R2012b and higher and includes various bug fixes and other improvements. |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 6.7.0.9 | * | 04.11.2022 | 254 MB | EXE | Automation_Studio_Target_for_Simulink_6.7.0.exe | |
| Popis |
Automation Studio Target for Simulink B&R Automation Studio Target™ for Simulink provides an easy-to-use but powerful solution for implementing advanced closed-loop controllers on B&R hardware. Providing an additional Simulink blockset for variable and parameter exchange, B&R Automation Studio™ Target for Simulink supports the whole range of B&R hardware for integrated automation. At the push of a button, source code optimized for B&R target systems is generated and automatically embedded into an Automation Studio™ project. Standard variable interfaces guarantee real-time data exchange between automatically generated programs and parallel tasks. Revision history: V6.7.0 14/10/2022 - Support R2022b - Support Automation Studio 4.12 - feature Simulink Web Interface: Stateflow support - bugfix Sim I/Os for generating code for referenced models V6.6.1 18/07/2022 - bugfix Automatic Transfer on ArSim - bugfix Config selection in B&R Config Block GUI - updated blocks in B&R demos with PID controller V6.6.0 25/4/2022 - Support R2022a - Support Automation Studio 4.11 V6.5.1 2/12/2021 - Support R2021b - EULA page included into installer - feature Simulink Web Interface: Simulink.Signal support - feature Simulink Web Interface: Simulink.Signal as Bus support - feature Simulink Web Interface: Depth for Subsystems and referenced models - feature Create Simulink.Parameter: Bus support - bugfix Create Simulink I/Os and Create Simulink.Parameter: stable build process for referenced models V6.4.2 30/07/2021 - bugfix Simulink Web Interface for Enums in Busses and Array of Busses - bugfix B&R Extended I/Os when variables are used as parameter V6.4.1 23/04/2021 - Added error message in Config Block if AS project is in numerically named folder - bugfix change cycle time for APC2200 - bugfix create Simulink.Parameter for SimScape model - bugfix External Mode for SimScape model V6.4.0 19/03/2021 - Support R2021a - Support stop for below R2018a - Codecompletion for B&R Config Block API - bugfix B&R Config Block Opening GUI on older MATLAB versions V6.3.1 15/12/2020 - feature Hot Plug Block: multiple Instances allowed - feature Hot Plug Block: new refresh factor editfield in GUI for setting update time - bugfix Hot Plug Block: if datatype is string, no error is thrown but a warning - bugfix Package field in B&R Config Block: SSC_includes is copied in root folder now - bugfix multidimensions in B&R Parameter block - bugfix B&R Config Block: now all 8 task classes are chooseable - bugfix B&R Config Block: ode1be solver now chooseable V6.3.0.68 30/10/2020 - Support R2020b - bugfix Hot Plug Block: Bus Element Variables not shown when declared as global - bugfix empty spaces in Bus Element Comments in .typ file not shown when generated as function block - german documentation revised - added SimScape pre-built library for faster compilation in AS project V6.2.2.59 28/08/2020 - bugfix Simulink I/Os - bugfix Simulink Parameter - bugfix Hot Plug Block Bus Detection - bugfix Hot Plug Block Ordering of Input and Output Ports - feature: Hot Plug Block Search for Variables - feature: Hot Plug Block Sort for Tasks - feature: Hot Plug Block Security with Username and Password (if in AS Project is a User added) - feature: Hot Plug Block Adding Bus Elements to Inport and/or Outport V6.2.1.48 07/07/2020 - feature: Multidimensional Array Support for Simulink.Parameter (flattened) - bugfix FUB generation: .typ file corrupted - bugfix empty space in variable name of a Simulink.Signal - bugfix FUB generation: Simulink.Parameter - bugfix different variable names for Simulink I/O and Simulink.Signal - bugfix Dimension in Bus Definition V6.2.0.43 28/05/2020 - bugfix in ConfigBlock GUI (reset of selection of Config name) - bugfix SimScape Codegeneration - bugfix Auto Transfer to real PLC - bugfix Simulink Web Interface (Subsystems) - added updated TechnologyGuard.exe V1.1.6.23 - Multidimensional Bus Elements now flattened in .typ file - new function Simulink Web Interface: multiple bus depth - support datatype STRING in B&R blocks V6.2.0.35 30/03/2020 - Support R2020a - bugfix B&R Input Block 1D-Array mismatch - new blocks for R2018a - R2020a: Extended Struct In/Out Block for selecting structures from .typ Files - Additional Files tab: Multiple selection of files - bugfix in bur_setup - additional infos in B&R comment header of generated files - added XLST files to sort XML generated files in same order than Automation Studio XML files - bugfix in relative path for Automation Studio - Enums in Busses support for Simulink I/Os and B&R Bus Input/Output blocks (also Data Dictionary support) V6.1.0 06/11/2019 - Support R2019b - No support earlier R2017a - refurbished Config block GUI - API for Config block - New Options in Config block: set Description for Task and Library, set Package for Task and Library (multiple depth) Expert Mode obsolete (always on), set Debugging flag for AS, set Preprocessing file - Option to create Simulink Parameter as AS variables - Option to create Simulink IOs as AS variables - Simulink Webview - Simulink Hot-Plug V6.0.2 - multidimensional array support for B&R Input, Output, Extended Input, Extended Output, Parameter Block - standard data types support for B&R Workspace Block - Stateflow ENUMs are generated as AS ENUMs when datatype is used in IO - bugfix for Simulink IOs as input of Environment Controller V6.0.1 - bugfix installer - bugfix multiple bus depth V6.0.0 - Important: New license mechanism and new licenses. Old licenses will not be supported. - Support Matlab R2019a - No support of Matlab Versions earlier R2016b - New installer: Installation without opening Matlab - Allow I/O Duplicates for Task - Allow I/O Duplicates for FUB resulting in VAR_IN_OUT variables in Automation Studio - New memory option 'reference' for Struct Block - Debugging option always ON for generated tasks/fubs - minor bugfixes V5.6.0 - Support Matlab R2018b - Support Data Dictionary for B&R Input, Output, Parameter, Workspace, Bus Input and Bus Output Block - Support Code Generation "Build Subsystem" - Support for standard Simulink I/O Blocks - minor bugfixes V5.5.0 - Support Matlab 2018a - Support for B&R automatic tranfer for ARSIM Version x.3x - Support for Matlab chances of External Mode - minor bugfixes - Update help V5.4.1 - Bug-Fix: Functionblock generation - B&R Parameterblock choosing bool generates Simulink Datatype boolean - Simscape Support for Matlab2017b - minor bugfixes V5.4.0 - Support Matlab 2017b - Silent Mode is available via B&R Config Block - Advanced Settings - B&R Structure Block supports Array of Structure - B&R Config Block handles the configuration of referenced models, no referenced configuration necessary anymore - minor bugfixes V5.3.1 - Missing structures for functionsblocks fixed - Support for AS 3.0.90 fixed - Enhanced structure recognition for functionblock generation - minor bugfixes V5.3.0 - Support Matlab R2017a - Enhanced function block generation - Bug fix: wrong error message for invalid Automation Studio project path corrected - Bug fix: Errors during code generation when target package contains dependencies - minor bugfixes V5.2.2 - Rework B&R Parameter Block - Rework B&R Bus Block - Rework B&R Extended Block V5.2.1 - Bug fix: Prearrangements and settings checked earlier to prohibit error messages during code generation process - Bug fix: Opening B&R Input and Output blocks doesn't cause error messages when there is no B&R configuration (block) V5.2.0 - Support Matlab R2016b - New Example for Simulink Multibody 'Steward Platform' - New helpfunction bur_setup - Parallel installation of 5.2.x with previous Automation Studio Target for Simulink Versions - No standard support for Automation Studio 3.0.81 - minor bugfixes V5.1.1 - Bug Fix: Zip Package of a model with Model Referencing - Config Block: Syntax check of version number - minor bugfixes V5.1.0 - Support Matlab R2016a - New Layout of the B&R Simulink Library Blocks - The functionality "Additional Files" supports relative paths - minor bugfixes V5.0.4 - Improved parameter check in config block - Bug Fix: FB generation - Bug Fix: Zip Package creation - Bug Fix: Warning message handling - Bug Fix: Error message handling - Bug Fix: Config-Block GUI - minor bugfixes V5.0.3 - Automatically add needed B&R standard libraries - Bug Fix: Codegeneration of a function block in an existing libary - Bug Fix: Model Referencing - Bug Fix: B&R Simulink Library V5.0.2 - supports Matlab from R2012b to R2015b - new Config Block User-Interface: model parameter setting can now be done in the Config Block V4.5.0 - Support for MATLAB 2015a - Functionblock can be added to a existing Library in Automation Studio - Simulink.Parameter and mpt.Parameter support in Workspace Variable Block - Support for B&R library guidelines compliant function block generation V4.4.1 - Bug fix Trialmode V4.4.0 Automation Studio Target for Simulink Version 4.4. supports the automatic code generation of MATLAB/Simulink 2014b as well as Simulink models using 'Model Referencing'. Thereby the time of code generation can be reduced dramatically (factor 10 to 100). Furthermore the Automation Studio Target for Simulink library has been extended around the block "Workspace Variable". The block provides the use of variables from the MATLAB workspace in generated tasks or function blocks in Automation Studio. V4.3.2 - Bug fixes V4.3.1 - Automation Studio Target for Simulink V4.3.1 supports automatic code generation from MATLAB R2014a. - Not only that, it also allows the use of reusable code for function block generation with MATLAB R2012b and higher and includes various bug fixes and other improvements. |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 6.6.1.123 | * | 02.08.2022 | 256 MB | EXE | Automation_Studio_Target_for_Simulink_6.6.1.exe | |
| Popis |
Automation Studio Target for Simulink B&R Automation Studio Target™ for Simulink provides an easy-to-use but powerful solution for implementing advanced closed-loop controllers on B&R hardware. Providing an additional Simulink blockset for variable and parameter exchange, B&R Automation Studio™ Target for Simulink supports the whole range of B&R hardware for integrated automation. At the push of a button, source code optimized for B&R target systems is generated and automatically embedded into an Automation Studio™ project. Standard variable interfaces guarantee real-time data exchange between automatically generated programs and parallel tasks. Revision history: V6.6.1 18/07/2022 - bugfix Automatic Transfer on ArSim - bugfix Config selection in B&R Config Block GUI - updated blocks in B&R demos with PID controller V6.6.0 25/4/2022 - Support R2022a - Support Automation Studio 4.11 V6.5.1 2/12/2021 - Support R2021b - EULA page included into installer - feature Simulink Web Interface: Simulink.Signal support - feature Simulink Web Interface: Simulink.Signal as Bus support - feature Simulink Web Interface: Depth for Subsystems and referenced models - feature Create Simulink.Parameter: Bus support - bugfix Create Simulink I/Os and Create Simulink.Parameter: stable build process for referenced models V6.4.2 30/07/2021 - bugfix Simulink Web Interface for Enums in Busses and Array of Busses - bugfix B&R Extended I/Os when variables are used as parameter V6.4.1 23/04/2021 - Added error message in Config Block if AS project is in numerically named folder - bugfix change cycle time for APC2200 - bugfix create Simulink.Parameter for SimScape model - bugfix External Mode for SimScape model V6.4.0 19/03/2021 - Support R2021a - Support stop for below R2018a - Codecompletion for B&R Config Block API - bugfix B&R Config Block Opening GUI on older MATLAB versions V6.3.1 15/12/2020 - feature Hot Plug Block: multiple Instances allowed - feature Hot Plug Block: new refresh factor editfield in GUI for setting update time - bugfix Hot Plug Block: if datatype is string, no error is thrown but a warning - bugfix Package field in B&R Config Block: SSC_includes is copied in root folder now - bugfix multidimensions in B&R Parameter block - bugfix B&R Config Block: now all 8 task classes are chooseable - bugfix B&R Config Block: ode1be solver now chooseable V6.3.0.68 30/10/2020 - Support R2020b - bugfix Hot Plug Block: Bus Element Variables not shown when declared as global - bugfix empty spaces in Bus Element Comments in .typ file not shown when generated as function block - german documentation revised - added SimScape pre-built library for faster compilation in AS project V6.2.2.59 28/08/2020 - bugfix Simulink I/Os - bugfix Simulink Parameter - bugfix Hot Plug Block Bus Detection - bugfix Hot Plug Block Ordering of Input and Output Ports - feature: Hot Plug Block Search for Variables - feature: Hot Plug Block Sort for Tasks - feature: Hot Plug Block Security with Username and Password (if in AS Project is a User added) - feature: Hot Plug Block Adding Bus Elements to Inport and/or Outport V6.2.1.48 07/07/2020 - feature: Multidimensional Array Support for Simulink.Parameter (flattened) - bugfix FUB generation: .typ file corrupted - bugfix empty space in variable name of a Simulink.Signal - bugfix FUB generation: Simulink.Parameter - bugfix different variable names for Simulink I/O and Simulink.Signal - bugfix Dimension in Bus Definition V6.2.0.43 28/05/2020 - bugfix in ConfigBlock GUI (reset of selection of Config name) - bugfix SimScape Codegeneration - bugfix Auto Transfer to real PLC - bugfix Simulink Web Interface (Subsystems) - added updated TechnologyGuard.exe V1.1.6.23 - Multidimensional Bus Elements now flattened in .typ file - new function Simulink Web Interface: multiple bus depth - support datatype STRING in B&R blocks V6.2.0.35 30/03/2020 - Support R2020a - bugfix B&R Input Block 1D-Array mismatch - new blocks for R2018a - R2020a: Extended Struct In/Out Block for selecting structures from .typ Files - Additional Files tab: Multiple selection of files - bugfix in bur_setup - additional infos in B&R comment header of generated files - added XLST files to sort XML generated files in same order than Automation Studio XML files - bugfix in relative path for Automation Studio - Enums in Busses support for Simulink I/Os and B&R Bus Input/Output blocks (also Data Dictionary support) V6.1.0 06/11/2019 - Support R2019b - No support earlier R2017a - refurbished Config block GUI - API for Config block - New Options in Config block: set Description for Task and Library, set Package for Task and Library (multiple depth) Expert Mode obsolete (always on), set Debugging flag for AS, set Preprocessing file - Option to create Simulink Parameter as AS variables - Option to create Simulink IOs as AS variables - Simulink Webview - Simulink Hot-Plug V6.0.2 - multidimensional array support for B&R Input, Output, Extended Input, Extended Output, Parameter Block - standard data types support for B&R Workspace Block - Stateflow ENUMs are generated as AS ENUMs when datatype is used in IO - bugfix for Simulink IOs as input of Environment Controller V6.0.1 - bugfix installer - bugfix multiple bus depth V6.0.0 - Important: New license mechanism and new licenses. Old licenses will not be supported. - Support Matlab R2019a - No support of Matlab Versions earlier R2016b - New installer: Installation without opening Matlab - Allow I/O Duplicates for Task - Allow I/O Duplicates for FUB resulting in VAR_IN_OUT variables in Automation Studio - New memory option 'reference' for Struct Block - Debugging option always ON for generated tasks/fubs - minor bugfixes V5.6.0 - Support Matlab R2018b - Support Data Dictionary for B&R Input, Output, Parameter, Workspace, Bus Input and Bus Output Block - Support Code Generation "Build Subsystem" - Support for standard Simulink I/O Blocks - minor bugfixes V5.5.0 - Support Matlab 2018a - Support for B&R automatic tranfer for ARSIM Version x.3x - Support for Matlab chances of External Mode - minor bugfixes - Update help V5.4.1 - Bug-Fix: Functionblock generation - B&R Parameterblock choosing bool generates Simulink Datatype boolean - Simscape Support for Matlab2017b - minor bugfixes V5.4.0 - Support Matlab 2017b - Silent Mode is available via B&R Config Block - Advanced Settings - B&R Structure Block supports Array of Structure - B&R Config Block handles the configuration of referenced models, no referenced configuration necessary anymore - minor bugfixes V5.3.1 - Missing structures for functionsblocks fixed - Support for AS 3.0.90 fixed - Enhanced structure recognition for functionblock generation - minor bugfixes V5.3.0 - Support Matlab R2017a - Enhanced function block generation - Bug fix: wrong error message for invalid Automation Studio project path corrected - Bug fix: Errors during code generation when target package contains dependencies - minor bugfixes V5.2.2 - Rework B&R Parameter Block - Rework B&R Bus Block - Rework B&R Extended Block V5.2.1 - Bug fix: Prearrangements and settings checked earlier to prohibit error messages during code generation process - Bug fix: Opening B&R Input and Output blocks doesn't cause error messages when there is no B&R configuration (block) V5.2.0 - Support Matlab R2016b - New Example for Simulink Multibody 'Steward Platform' - New helpfunction bur_setup - Parallel installation of 5.2.x with previous Automation Studio Target for Simulink Versions - No standard support for Automation Studio 3.0.81 - minor bugfixes V5.1.1 - Bug Fix: Zip Package of a model with Model Referencing - Config Block: Syntax check of version number - minor bugfixes V5.1.0 - Support Matlab R2016a - New Layout of the B&R Simulink Library Blocks - The functionality "Additional Files" supports relative paths - minor bugfixes V5.0.4 - Improved parameter check in config block - Bug Fix: FB generation - Bug Fix: Zip Package creation - Bug Fix: Warning message handling - Bug Fix: Error message handling - Bug Fix: Config-Block GUI - minor bugfixes V5.0.3 - Automatically add needed B&R standard libraries - Bug Fix: Codegeneration of a function block in an existing libary - Bug Fix: Model Referencing - Bug Fix: B&R Simulink Library V5.0.2 - supports Matlab from R2012b to R2015b - new Config Block User-Interface: model parameter setting can now be done in the Config Block V4.5.0 - Support for MATLAB 2015a - Functionblock can be added to a existing Library in Automation Studio - Simulink.Parameter and mpt.Parameter support in Workspace Variable Block - Support for B&R library guidelines compliant function block generation V4.4.1 - Bug fix Trialmode V4.4.0 Automation Studio Target for Simulink Version 4.4. supports the automatic code generation of MATLAB/Simulink 2014b as well as Simulink models using 'Model Referencing'. Thereby the time of code generation can be reduced dramatically (factor 10 to 100). Furthermore the Automation Studio Target for Simulink library has been extended around the block "Workspace Variable". The block provides the use of variables from the MATLAB workspace in generated tasks or function blocks in Automation Studio. V4.3.2 - Bug fixes V4.3.1 - Automation Studio Target for Simulink V4.3.1 supports automatic code generation from MATLAB R2014a. - Not only that, it also allows the use of reusable code for function block generation with MATLAB R2012b and higher and includes various bug fixes and other improvements. |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 6.6.0.115 | * | 19.05.2022 | 256 MB | EXE | Automation_Studio_Target_for_Simulink_6.6.0.exe | |
| Popis |
Automation Studio Target for Simulink B&R Automation Studio Target™ for Simulink provides an easy-to-use but powerful solution for implementing advanced closed-loop controllers on B&R hardware. Providing an additional Simulink blockset for variable and parameter exchange, B&R Automation Studio™ Target for Simulink supports the whole range of B&R hardware for integrated automation. At the push of a button, source code optimized for B&R target systems is generated and automatically embedded into an Automation Studio™ project. Standard variable interfaces guarantee real-time data exchange between automatically generated programs and parallel tasks. Revision history: V6.6.0 25/4/2022 - Support R2022a - Support Automation Studio 4.11 V6.5.1 2/12/2021 - Support R2021b - EULA page included into installer - feature Simulink Web Interface: Simulink.Signal support - feature Simulink Web Interface: Simulink.Signal as Bus support - feature Simulink Web Interface: Depth for Subsystems and referenced models - feature Create Simulink.Parameter: Bus support - bugfix Create Simulink I/Os and Create Simulink.Parameter: stable build process for referenced models V6.4.2 30/07/2021 - bugfix Simulink Web Interface for Enums in Busses and Array of Busses - bugfix B&R Extended I/Os when variables are used as parameter V6.4.1 23/04/2021 - Added error message in Config Block if AS project is in numerically named folder - bugfix change cycle time for APC2200 - bugfix create Simulink.Parameter for SimScape model - bugfix External Mode for SimScape model V6.4.0 19/03/2021 - Support R2021a - Support stop for below R2018a - Codecompletion for B&R Config Block API - bugfix B&R Config Block Opening GUI on older MATLAB versions V6.3.1 15/12/2020 - feature Hot Plug Block: multiple Instances allowed - feature Hot Plug Block: new refresh factor editfield in GUI for setting update time - bugfix Hot Plug Block: if datatype is string, no error is thrown but a warning - bugfix Package field in B&R Config Block: SSC_includes is copied in root folder now - bugfix multidimensions in B&R Parameter block - bugfix B&R Config Block: now all 8 task classes are chooseable - bugfix B&R Config Block: ode1be solver now chooseable V6.3.0.68 30/10/2020 - Support R2020b - bugfix Hot Plug Block: Bus Element Variables not shown when declared as global - bugfix empty spaces in Bus Element Comments in .typ file not shown when generated as function block - german documentation revised - added SimScape pre-built library for faster compilation in AS project V6.2.2.59 28/08/2020 - bugfix Simulink I/Os - bugfix Simulink Parameter - bugfix Hot Plug Block Bus Detection - bugfix Hot Plug Block Ordering of Input and Output Ports - feature: Hot Plug Block Search for Variables - feature: Hot Plug Block Sort for Tasks - feature: Hot Plug Block Security with Username and Password (if in AS Project is a User added) - feature: Hot Plug Block Adding Bus Elements to Inport and/or Outport V6.2.1.48 07/07/2020 - feature: Multidimensional Array Support for Simulink.Parameter (flattened) - bugfix FUB generation: .typ file corrupted - bugfix empty space in variable name of a Simulink.Signal - bugfix FUB generation: Simulink.Parameter - bugfix different variable names for Simulink I/O and Simulink.Signal - bugfix Dimension in Bus Definition V6.2.0.43 28/05/2020 - bugfix in ConfigBlock GUI (reset of selection of Config name) - bugfix SimScape Codegeneration - bugfix Auto Transfer to real PLC - bugfix Simulink Web Interface (Subsystems) - added updated TechnologyGuard.exe V1.1.6.23 - Multidimensional Bus Elements now flattened in .typ file - new function Simulink Web Interface: multiple bus depth - support datatype STRING in B&R blocks V6.2.0.35 30/03/2020 - Support R2020a - bugfix B&R Input Block 1D-Array mismatch - new blocks for R2018a - R2020a: Extended Struct In/Out Block for selecting structures from .typ Files - Additional Files tab: Multiple selection of files - bugfix in bur_setup - additional infos in B&R comment header of generated files - added XLST files to sort XML generated files in same order than Automation Studio XML files - bugfix in relative path for Automation Studio - Enums in Busses support for Simulink I/Os and B&R Bus Input/Output blocks (also Data Dictionary support) V6.1.0 06/11/2019 - Support R2019b - No support earlier R2017a - refurbished Config block GUI - API for Config block - New Options in Config block: set Description for Task and Library, set Package for Task and Library (multiple depth) Expert Mode obsolete (always on), set Debugging flag for AS, set Preprocessing file - Option to create Simulink Parameter as AS variables - Option to create Simulink IOs as AS variables - Simulink Webview - Simulink Hot-Plug V6.0.2 - multidimensional array support for B&R Input, Output, Extended Input, Extended Output, Parameter Block - standard data types support for B&R Workspace Block - Stateflow ENUMs are generated as AS ENUMs when datatype is used in IO - bugfix for Simulink IOs as input of Environment Controller V6.0.1 - bugfix installer - bugfix multiple bus depth V6.0.0 - Important: New license mechanism and new licenses. Old licenses will not be supported. - Support Matlab R2019a - No support of Matlab Versions earlier R2016b - New installer: Installation without opening Matlab - Allow I/O Duplicates for Task - Allow I/O Duplicates for FUB resulting in VAR_IN_OUT variables in Automation Studio - New memory option 'reference' for Struct Block - Debugging option always ON for generated tasks/fubs - minor bugfixes V5.6.0 - Support Matlab R2018b - Support Data Dictionary for B&R Input, Output, Parameter, Workspace, Bus Input and Bus Output Block - Support Code Generation "Build Subsystem" - Support for standard Simulink I/O Blocks - minor bugfixes V5.5.0 - Support Matlab 2018a - Support for B&R automatic tranfer for ARSIM Version x.3x - Support for Matlab chances of External Mode - minor bugfixes - Update help V5.4.1 - Bug-Fix: Functionblock generation - B&R Parameterblock choosing bool generates Simulink Datatype boolean - Simscape Support for Matlab2017b - minor bugfixes V5.4.0 - Support Matlab 2017b - Silent Mode is available via B&R Config Block - Advanced Settings - B&R Structure Block supports Array of Structure - B&R Config Block handles the configuration of referenced models, no referenced configuration necessary anymore - minor bugfixes V5.3.1 - Missing structures for functionsblocks fixed - Support for AS 3.0.90 fixed - Enhanced structure recognition for functionblock generation - minor bugfixes V5.3.0 - Support Matlab R2017a - Enhanced function block generation - Bug fix: wrong error message for invalid Automation Studio project path corrected - Bug fix: Errors during code generation when target package contains dependencies - minor bugfixes V5.2.2 - Rework B&R Parameter Block - Rework B&R Bus Block - Rework B&R Extended Block V5.2.1 - Bug fix: Prearrangements and settings checked earlier to prohibit error messages during code generation process - Bug fix: Opening B&R Input and Output blocks doesn't cause error messages when there is no B&R configuration (block) V5.2.0 - Support Matlab R2016b - New Example for Simulink Multibody 'Steward Platform' - New helpfunction bur_setup - Parallel installation of 5.2.x with previous Automation Studio Target for Simulink Versions - No standard support for Automation Studio 3.0.81 - minor bugfixes V5.1.1 - Bug Fix: Zip Package of a model with Model Referencing - Config Block: Syntax check of version number - minor bugfixes V5.1.0 - Support Matlab R2016a - New Layout of the B&R Simulink Library Blocks - The functionality "Additional Files" supports relative paths - minor bugfixes V5.0.4 - Improved parameter check in config block - Bug Fix: FB generation - Bug Fix: Zip Package creation - Bug Fix: Warning message handling - Bug Fix: Error message handling - Bug Fix: Config-Block GUI - minor bugfixes V5.0.3 - Automatically add needed B&R standard libraries - Bug Fix: Codegeneration of a function block in an existing libary - Bug Fix: Model Referencing - Bug Fix: B&R Simulink Library V5.0.2 - supports Matlab from R2012b to R2015b - new Config Block User-Interface: model parameter setting can now be done in the Config Block V4.5.0 - Support for MATLAB 2015a - Functionblock can be added to a existing Library in Automation Studio - Simulink.Parameter and mpt.Parameter support in Workspace Variable Block - Support for B&R library guidelines compliant function block generation V4.4.1 - Bug fix Trialmode V4.4.0 Automation Studio Target for Simulink Version 4.4. supports the automatic code generation of MATLAB/Simulink 2014b as well as Simulink models using 'Model Referencing'. Thereby the time of code generation can be reduced dramatically (factor 10 to 100). Furthermore the Automation Studio Target for Simulink library has been extended around the block "Workspace Variable". The block provides the use of variables from the MATLAB workspace in generated tasks or function blocks in Automation Studio. V4.3.2 - Bug fixes V4.3.1 - Automation Studio Target for Simulink V4.3.1 supports automatic code generation from MATLAB R2014a. - Not only that, it also allows the use of reusable code for function block generation with MATLAB R2012b and higher and includes various bug fixes and other improvements. |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 6.5.1.113 | * | 09.12.2021 | 255 MB | EXE | Automation_Studio_Target_for_Simulink_6.5.1.exe | |
| Popis |
Automation Studio Target for Simulink B&R Automation Studio Target™ for Simulink provides an easy-to-use but powerful solution for implementing advanced closed-loop controllers on B&R hardware. Providing an additional Simulink blockset for variable and parameter exchange, B&R Automation Studio™ Target for Simulink supports the whole range of B&R hardware for integrated automation. At the push of a button, source code optimized for B&R target systems is generated and automatically embedded into an Automation Studio™ project. Standard variable interfaces guarantee real-time data exchange between automatically generated programs and parallel tasks. Revision history: V6.5.1 2/12/2021 - Support R2021b - EULA page included into installer - feature Simulink Web Interface: Simulink.Signal support - feature Simulink Web Interface: Simulink.Signal as Bus support - feature Simulink Web Interface: Depth for Subsystems and referenced models - feature Create Simulink.Parameter: Bus support - bugfix Create Simulink I/Os and Create Simulink.Parameter: stable build process for referenced models V6.4.2 30/07/2021 - bugfix Simulink Web Interface for Enums in Busses and Array of Busses - bugfix B&R Extended I/Os when variables are used as parameter V6.4.1 23/04/2021 - Added error message in Config Block if AS project is in numerically named folder - bugfix change cycle time for APC2200 - bugfix create Simulink.Parameter for SimScape model - bugfix External Mode for SimScape model V6.4.0 19/03/2021 - Support R2021a - Support stop for below R2018a - Codecompletion for B&R Config Block API - bugfix B&R Config Block Opening GUI on older MATLAB versions V6.3.1 15/12/2020 - feature Hot Plug Block: multiple Instances allowed - feature Hot Plug Block: new refresh factor editfield in GUI for setting update time - bugfix Hot Plug Block: if datatype is string, no error is thrown but a warning - bugfix Package field in B&R Config Block: SSC_includes is copied in root folder now - bugfix multidimensions in B&R Parameter block - bugfix B&R Config Block: now all 8 task classes are chooseable - bugfix B&R Config Block: ode1be solver now chooseable V6.3.0.68 30/10/2020 - Support R2020b - bugfix Hot Plug Block: Bus Element Variables not shown when declared as global - bugfix empty spaces in Bus Element Comments in .typ file not shown when generated as function block - german documentation revised - added SimScape pre-built library for faster compilation in AS project V6.2.2.59 28/08/2020 - bugfix Simulink I/Os - bugfix Simulink Parameter - bugfix Hot Plug Block Bus Detection - bugfix Hot Plug Block Ordering of Input and Output Ports - feature: Hot Plug Block Search for Variables - feature: Hot Plug Block Sort for Tasks - feature: Hot Plug Block Security with Username and Password (if in AS Project is a User added) - feature: Hot Plug Block Adding Bus Elements to Inport and/or Outport V6.2.1.48 07/07/2020 - feature: Multidimensional Array Support for Simulink.Parameter (flattened) - bugfix FUB generation: .typ file corrupted - bugfix empty space in variable name of a Simulink.Signal - bugfix FUB generation: Simulink.Parameter - bugfix different variable names for Simulink I/O and Simulink.Signal - bugfix Dimension in Bus Definition V6.2.0.43 28/05/2020 - bugfix in ConfigBlock GUI (reset of selection of Config name) - bugfix SimScape Codegeneration - bugfix Auto Transfer to real PLC - bugfix Simulink Web Interface (Subsystems) - added updated TechnologyGuard.exe V1.1.6.23 - Multidimensional Bus Elements now flattened in .typ file - new function Simulink Web Interface: multiple bus depth - support datatype STRING in B&R blocks V6.2.0.35 30/03/2020 - Support R2020a - bugfix B&R Input Block 1D-Array mismatch - new blocks for R2018a - R2020a: Extended Struct In/Out Block for selecting structures from .typ Files - Additional Files tab: Multiple selection of files - bugfix in bur_setup - additional infos in B&R comment header of generated files - added XLST files to sort XML generated files in same order than Automation Studio XML files - bugfix in relative path for Automation Studio - Enums in Busses support for Simulink I/Os and B&R Bus Input/Output blocks (also Data Dictionary support) V6.1.0 06/11/2019 - Support R2019b - No support earlier R2017a - refurbished Config block GUI - API for Config block - New Options in Config block: set Description for Task and Library, set Package for Task and Library (multiple depth) Expert Mode obsolete (always on), set Debugging flag for AS, set Preprocessing file - Option to create Simulink Parameter as AS variables - Option to create Simulink IOs as AS variables - Simulink Webview - Simulink Hot-Plug V6.0.2 - multidimensional array support for B&R Input, Output, Extended Input, Extended Output, Parameter Block - standard data types support for B&R Workspace Block - Stateflow ENUMs are generated as AS ENUMs when datatype is used in IO - bugfix for Simulink IOs as input of Environment Controller V6.0.1 - bugfix installer - bugfix multiple bus depth V6.0.0 - Important: New license mechanism and new licenses. Old licenses will not be supported. - Support Matlab R2019a - No support of Matlab Versions earlier R2016b - New installer: Installation without opening Matlab - Allow I/O Duplicates for Task - Allow I/O Duplicates for FUB resulting in VAR_IN_OUT variables in Automation Studio - New memory option 'reference' for Struct Block - Debugging option always ON for generated tasks/fubs - minor bugfixes V5.6.0 - Support Matlab R2018b - Support Data Dictionary for B&R Input, Output, Parameter, Workspace, Bus Input and Bus Output Block - Support Code Generation "Build Subsystem" - Support for standard Simulink I/O Blocks - minor bugfixes V5.5.0 - Support Matlab 2018a - Support for B&R automatic tranfer for ARSIM Version x.3x - Support for Matlab chances of External Mode - minor bugfixes - Update help V5.4.1 - Bug-Fix: Functionblock generation - B&R Parameterblock choosing bool generates Simulink Datatype boolean - Simscape Support for Matlab2017b - minor bugfixes V5.4.0 - Support Matlab 2017b - Silent Mode is available via B&R Config Block - Advanced Settings - B&R Structure Block supports Array of Structure - B&R Config Block handles the configuration of referenced models, no referenced configuration necessary anymore - minor bugfixes V5.3.1 - Missing structures for functionsblocks fixed - Support for AS 3.0.90 fixed - Enhanced structure recognition for functionblock generation - minor bugfixes V5.3.0 - Support Matlab R2017a - Enhanced function block generation - Bug fix: wrong error message for invalid Automation Studio project path corrected - Bug fix: Errors during code generation when target package contains dependencies - minor bugfixes V5.2.2 - Rework B&R Parameter Block - Rework B&R Bus Block - Rework B&R Extended Block V5.2.1 - Bug fix: Prearrangements and settings checked earlier to prohibit error messages during code generation process - Bug fix: Opening B&R Input and Output blocks doesn't cause error messages when there is no B&R configuration (block) V5.2.0 - Support Matlab R2016b - New Example for Simulink Multibody 'Steward Platform' - New helpfunction bur_setup - Parallel installation of 5.2.x with previous Automation Studio Target for Simulink Versions - No standard support for Automation Studio 3.0.81 - minor bugfixes V5.1.1 - Bug Fix: Zip Package of a model with Model Referencing - Config Block: Syntax check of version number - minor bugfixes V5.1.0 - Support Matlab R2016a - New Layout of the B&R Simulink Library Blocks - The functionality "Additional Files" supports relative paths - minor bugfixes V5.0.4 - Improved parameter check in config block - Bug Fix: FB generation - Bug Fix: Zip Package creation - Bug Fix: Warning message handling - Bug Fix: Error message handling - Bug Fix: Config-Block GUI - minor bugfixes V5.0.3 - Automatically add needed B&R standard libraries - Bug Fix: Codegeneration of a function block in an existing libary - Bug Fix: Model Referencing - Bug Fix: B&R Simulink Library V5.0.2 - supports Matlab from R2012b to R2015b - new Config Block User-Interface: model parameter setting can now be done in the Config Block V4.5.0 - Support for MATLAB 2015a - Functionblock can be added to a existing Library in Automation Studio - Simulink.Parameter and mpt.Parameter support in Workspace Variable Block - Support for B&R library guidelines compliant function block generation V4.4.1 - Bug fix Trialmode V4.4.0 Automation Studio Target for Simulink Version 4.4. supports the automatic code generation of MATLAB/Simulink 2014b as well as Simulink models using 'Model Referencing'. Thereby the time of code generation can be reduced dramatically (factor 10 to 100). Furthermore the Automation Studio Target for Simulink library has been extended around the block "Workspace Variable". The block provides the use of variables from the MATLAB workspace in generated tasks or function blocks in Automation Studio. V4.3.2 - Bug fixes V4.3.1 - Automation Studio Target for Simulink V4.3.1 supports automatic code generation from MATLAB R2014a. - Not only that, it also allows the use of reusable code for function block generation with MATLAB R2012b and higher and includes various bug fixes and other improvements. |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 6.4.2.95 | * | 25.08.2021 | 249 MB | EXE | Automation_Studio_Target_for_Simulink_6.4.2.exe | |
| Popis |
Automation Studio Target for Simulink B&R Automation Studio Target™ for Simulink provides an easy-to-use but powerful solution for implementing advanced closed-loop controllers on B&R hardware. Providing an additional Simulink blockset for variable and parameter exchange, B&R Automation Studio™ Target for Simulink supports the whole range of B&R hardware for integrated automation. At the push of a button, source code optimized for B&R target systems is generated and automatically embedded into an Automation Studio™ project. Standard variable interfaces guarantee real-time data exchange between automatically generated programs and parallel tasks. Revision history: V6.4.2 30/07/2021 - bugfix Simulink Web Interface for Enums in Busses and Array of Busses - bugfix B&R Extended I/Os when variables are used as parameter V6.4.1 23/04/2021 - Added error message in Config Block if AS project is in numerically named folder - bugfix change cycle time for APC2200 - bugfix create Simulink.Parameter for SimScape model - bugfix External Mode for SimScape model V6.4.0 19/03/2021 - Support R2021a - Support stop for below R2018a - Codecompletion for B&R Config Block API - bugfix B&R Config Block Opening GUI on older MATLAB versions V6.3.1 15/12/2020 - feature Hot Plug Block: multiple Instances allowed - feature Hot Plug Block: new refresh factor editfield in GUI for setting update time - bugfix Hot Plug Block: if datatype is string, no error is thrown but a warning - bugfix Package field in B&R Config Block: SSC_includes is copied in root folder now - bugfix multidimensions in B&R Parameter block - bugfix B&R Config Block: now all 8 task classes are chooseable - bugfix B&R Config Block: ode1be solver now chooseable V6.3.0.68 30/10/2020 - Support R2020b - bugfix Hot Plug Block: Bus Element Variables not shown when declared as global - bugfix empty spaces in Bus Element Comments in .typ file not shown when generated as function block - german documentation revised - added SimScape pre-built library for faster compilation in AS project V6.2.2.59 28/08/2020 - bugfix Simulink I/Os - bugfix Simulink Parameter - bugfix Hot Plug Block Bus Detection - bugfix Hot Plug Block Ordering of Input and Output Ports - feature: Hot Plug Block Search for Variables - feature: Hot Plug Block Sort for Tasks - feature: Hot Plug Block Security with Username and Password (if in AS Project is a User added) - feature: Hot Plug Block Adding Bus Elements to Inport and/or Outport V6.2.1.48 07/07/2020 - feature: Multidimensional Array Support for Simulink.Parameter (flattened) - bugfix FUB generation: .typ file corrupted - bugfix empty space in variable name of a Simulink.Signal - bugfix FUB generation: Simulink.Parameter - bugfix different variable names for Simulink I/O and Simulink.Signal - bugfix Dimension in Bus Definition V6.2.0.43 28/05/2020 - bugfix in ConfigBlock GUI (reset of selection of Config name) - bugfix SimScape Codegeneration - bugfix Auto Transfer to real PLC - bugfix Simulink Web Interface (Subsystems) - added updated TechnologyGuard.exe V1.1.6.23 - Multidimensional Bus Elements now flattened in .typ file - new function Simulink Web Interface: multiple bus depth - support datatype STRING in B&R blocks V6.2.0.35 30/03/2020 - Support R2020a - bugfix B&R Input Block 1D-Array mismatch - new blocks for R2018a - R2020a: Extended Struct In/Out Block for selecting structures from .typ Files - Additional Files tab: Multiple selection of files - bugfix in bur_setup - additional infos in B&R comment header of generated files - added XLST files to sort XML generated files in same order than Automation Studio XML files - bugfix in relative path for Automation Studio - Enums in Busses support for Simulink I/Os and B&R Bus Input/Output blocks (also Data Dictionary support) V6.1.0 06/11/2019 - Support R2019b - No support earlier R2017a - refurbished Config block GUI - API for Config block - New Options in Config block: set Description for Task and Library, set Package for Task and Library (multiple depth) Expert Mode obsolete (always on), set Debugging flag for AS, set Preprocessing file - Option to create Simulink Parameter as AS variables - Option to create Simulink IOs as AS variables - Simulink Webview - Simulink Hot-Plug V6.0.2 - multidimensional array support for B&R Input, Output, Extended Input, Extended Output, Parameter Block - standard data types support for B&R Workspace Block - Stateflow ENUMs are generated as AS ENUMs when datatype is used in IO - bugfix for Simulink IOs as input of Environment Controller V6.0.1 - bugfix installer - bugfix multiple bus depth V6.0.0 - Important: New license mechanism and new licenses. Old licenses will not be supported. - Support Matlab R2019a - No support of Matlab Versions earlier R2016b - New installer: Installation without opening Matlab - Allow I/O Duplicates for Task - Allow I/O Duplicates for FUB resulting in VAR_IN_OUT variables in Automation Studio - New memory option 'reference' for Struct Block - Debugging option always ON for generated tasks/fubs - minor bugfixes V5.6.0 - Support Matlab R2018b - Support Data Dictionary for B&R Input, Output, Parameter, Workspace, Bus Input and Bus Output Block - Support Code Generation "Build Subsystem" - Support for standard Simulink I/O Blocks - minor bugfixes V5.5.0 - Support Matlab 2018a - Support for B&R automatic tranfer for ARSIM Version x.3x - Support for Matlab chances of External Mode - minor bugfixes - Update help V5.4.1 - Bug-Fix: Functionblock generation - B&R Parameterblock choosing bool generates Simulink Datatype boolean - Simscape Support for Matlab2017b - minor bugfixes V5.4.0 - Support Matlab 2017b - Silent Mode is available via B&R Config Block - Advanced Settings - B&R Structure Block supports Array of Structure - B&R Config Block handles the configuration of referenced models, no referenced configuration necessary anymore - minor bugfixes V5.3.1 - Missing structures for functionsblocks fixed - Support for AS 3.0.90 fixed - Enhanced structure recognition for functionblock generation - minor bugfixes V5.3.0 - Support Matlab R2017a - Enhanced function block generation - Bug fix: wrong error message for invalid Automation Studio project path corrected - Bug fix: Errors during code generation when target package contains dependencies - minor bugfixes V5.2.2 - Rework B&R Parameter Block - Rework B&R Bus Block - Rework B&R Extended Block V5.2.1 - Bug fix: Prearrangements and settings checked earlier to prohibit error messages during code generation process - Bug fix: Opening B&R Input and Output blocks doesn't cause error messages when there is no B&R configuration (block) V5.2.0 - Support Matlab R2016b - New Example for Simulink Multibody 'Steward Platform' - New helpfunction bur_setup - Parallel installation of 5.2.x with previous Automation Studio Target for Simulink Versions - No standard support for Automation Studio 3.0.81 - minor bugfixes V5.1.1 - Bug Fix: Zip Package of a model with Model Referencing - Config Block: Syntax check of version number - minor bugfixes V5.1.0 - Support Matlab R2016a - New Layout of the B&R Simulink Library Blocks - The functionality "Additional Files" supports relative paths - minor bugfixes V5.0.4 - Improved parameter check in config block - Bug Fix: FB generation - Bug Fix: Zip Package creation - Bug Fix: Warning message handling - Bug Fix: Error message handling - Bug Fix: Config-Block GUI - minor bugfixes V5.0.3 - Automatically add needed B&R standard libraries - Bug Fix: Codegeneration of a function block in an existing libary - Bug Fix: Model Referencing - Bug Fix: B&R Simulink Library V5.0.2 - supports Matlab from R2012b to R2015b - new Config Block User-Interface: model parameter setting can now be done in the Config Block V4.5.0 - Support for MATLAB 2015a - Functionblock can be added to a existing Library in Automation Studio - Simulink.Parameter and mpt.Parameter support in Workspace Variable Block - Support for B&R library guidelines compliant function block generation V4.4.1 - Bug fix Trialmode V4.4.0 Automation Studio Target for Simulink Version 4.4. supports the automatic code generation of MATLAB/Simulink 2014b as well as Simulink models using 'Model Referencing'. Thereby the time of code generation can be reduced dramatically (factor 10 to 100). Furthermore the Automation Studio Target for Simulink library has been extended around the block "Workspace Variable". The block provides the use of variables from the MATLAB workspace in generated tasks or function blocks in Automation Studio. V4.3.2 - Bug fixes V4.3.1 - Automation Studio Target for Simulink V4.3.1 supports automatic code generation from MATLAB R2014a. - Not only that, it also allows the use of reusable code for function block generation with MATLAB R2012b and higher and includes various bug fixes and other improvements. |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 6.4.1.92 | * | 12.05.2021 | 248 MB | EXE | Automation_Studio_Target_for_Simulink_6.4.1.exe | |
| Popis |
Automation Studio Target for Simulink B&R Automation Studio Target™ for Simulink provides an easy-to-use but powerful solution for implementing advanced closed-loop controllers on B&R hardware. Providing an additional Simulink blockset for variable and parameter exchange, B&R Automation Studio™ Target for Simulink supports the whole range of B&R hardware for integrated automation. At the push of a button, source code optimized for B&R target systems is generated and automatically embedded into an Automation Studio™ project. Standard variable interfaces guarantee real-time data exchange between automatically generated programs and parallel tasks. Revision history: V6.4.1 23/04/2021 - Added error message in Config Block if AS project is in numerically named folder - bugfix change cycle time for APC2200 - bugfix create Simulink.Parameter for SimScape model - bugfix External Mode for SimScape model V6.4.0 19/03/2021 - Support R2021a - Support stop for below R2018a - Codecompletion for B&R Config Block API - bugfix B&R Config Block Opening GUI on older MATLAB versions V6.3.1 15/12/2020 - feature Hot Plug Block: multiple Instances allowed - feature Hot Plug Block: new refresh factor editfield in GUI for setting update time - bugfix Hot Plug Block: if datatype is string, no error is thrown but a warning - bugfix Package field in B&R Config Block: SSC_includes is copied in root folder now - bugfix multidimensions in B&R Parameter block - bugfix B&R Config Block: now all 8 task classes are chooseable - bugfix B&R Config Block: ode1be solver now chooseable V6.3.0.68 30/10/2020 - Support R2020b - bugfix Hot Plug Block: Bus Element Variables not shown when declared as global - bugfix empty spaces in Bus Element Comments in .typ file not shown when generated as function block - german documentation revised - added SimScape pre-built library for faster compilation in AS project V6.2.2.59 28/08/2020 - bugfix Simulink I/Os - bugfix Simulink Parameter - bugfix Hot Plug Block Bus Detection - bugfix Hot Plug Block Ordering of Input and Output Ports - feature: Hot Plug Block Search for Variables - feature: Hot Plug Block Sort for Tasks - feature: Hot Plug Block Security with Username and Password (if in AS Project is a User added) - feature: Hot Plug Block Adding Bus Elements to Inport and/or Outport V6.2.1.48 07/07/2020 - feature: Multidimensional Array Support for Simulink.Parameter (flattened) - bugfix FUB generation: .typ file corrupted - bugfix empty space in variable name of a Simulink.Signal - bugfix FUB generation: Simulink.Parameter - bugfix different variable names for Simulink I/O and Simulink.Signal - bugfix Dimension in Bus Definition V6.2.0.43 28/05/2020 - bugfix in ConfigBlock GUI (reset of selection of Config name) - bugfix SimScape Codegeneration - bugfix Auto Transfer to real PLC - bugfix Simulink Web Interface (Subsystems) - added updated TechnologyGuard.exe V1.1.6.23 - Multidimensional Bus Elements now flattened in .typ file - new function Simulink Web Interface: multiple bus depth - support datatype STRING in B&R blocks V6.2.0.35 30/03/2020 - Support R2020a - bugfix B&R Input Block 1D-Array mismatch - new blocks for R2018a - R2020a: Extended Struct In/Out Block for selecting structures from .typ Files - Additional Files tab: Multiple selection of files - bugfix in bur_setup - additional infos in B&R comment header of generated files - added XLST files to sort XML generated files in same order than Automation Studio XML files - bugfix in relative path for Automation Studio - Enums in Busses support for Simulink I/Os and B&R Bus Input/Output blocks (also Data Dictionary support) V6.1.0 06/11/2019 - Support R2019b - No support earlier R2017a - refurbished Config block GUI - API for Config block - New Options in Config block: set Description for Task and Library, set Package for Task and Library (multiple depth) Expert Mode obsolete (always on), set Debugging flag for AS, set Preprocessing file - Option to create Simulink Parameter as AS variables - Option to create Simulink IOs as AS variables - Simulink Webview - Simulink Hot-Plug V6.0.2 - multidimensional array support for B&R Input, Output, Extended Input, Extended Output, Parameter Block - standard data types support for B&R Workspace Block - Stateflow ENUMs are generated as AS ENUMs when datatype is used in IO - bugfix for Simulink IOs as input of Environment Controller V6.0.1 - bugfix installer - bugfix multiple bus depth V6.0.0 - Important: New license mechanism and new licenses. Old licenses will not be supported. - Support Matlab R2019a - No support of Matlab Versions earlier R2016b - New installer: Installation without opening Matlab - Allow I/O Duplicates for Task - Allow I/O Duplicates for FUB resulting in VAR_IN_OUT variables in Automation Studio - New memory option 'reference' for Struct Block - Debugging option always ON for generated tasks/fubs - minor bugfixes V5.6.0 - Support Matlab R2018b - Support Data Dictionary for B&R Input, Output, Parameter, Workspace, Bus Input and Bus Output Block - Support Code Generation "Build Subsystem" - Support for standard Simulink I/O Blocks - minor bugfixes V5.5.0 - Support Matlab 2018a - Support for B&R automatic tranfer for ARSIM Version x.3x - Support for Matlab chances of External Mode - minor bugfixes - Update help V5.4.1 - Bug-Fix: Functionblock generation - B&R Parameterblock choosing bool generates Simulink Datatype boolean - Simscape Support for Matlab2017b - minor bugfixes V5.4.0 - Support Matlab 2017b - Silent Mode is available via B&R Config Block - Advanced Settings - B&R Structure Block supports Array of Structure - B&R Config Block handles the configuration of referenced models, no referenced configuration necessary anymore - minor bugfixes V5.3.1 - Missing structures for functionsblocks fixed - Support for AS 3.0.90 fixed - Enhanced structure recognition for functionblock generation - minor bugfixes V5.3.0 - Support Matlab R2017a - Enhanced function block generation - Bug fix: wrong error message for invalid Automation Studio project path corrected - Bug fix: Errors during code generation when target package contains dependencies - minor bugfixes V5.2.2 - Rework B&R Parameter Block - Rework B&R Bus Block - Rework B&R Extended Block V5.2.1 - Bug fix: Prearrangements and settings checked earlier to prohibit error messages during code generation process - Bug fix: Opening B&R Input and Output blocks doesn't cause error messages when there is no B&R configuration (block) V5.2.0 - Support Matlab R2016b - New Example for Simulink Multibody 'Steward Platform' - New helpfunction bur_setup - Parallel installation of 5.2.x with previous Automation Studio Target for Simulink Versions - No standard support for Automation Studio 3.0.81 - minor bugfixes V5.1.1 - Bug Fix: Zip Package of a model with Model Referencing - Config Block: Syntax check of version number - minor bugfixes V5.1.0 - Support Matlab R2016a - New Layout of the B&R Simulink Library Blocks - The functionality "Additional Files" supports relative paths - minor bugfixes V5.0.4 - Improved parameter check in config block - Bug Fix: FB generation - Bug Fix: Zip Package creation - Bug Fix: Warning message handling - Bug Fix: Error message handling - Bug Fix: Config-Block GUI - minor bugfixes V5.0.3 - Automatically add needed B&R standard libraries - Bug Fix: Codegeneration of a function block in an existing libary - Bug Fix: Model Referencing - Bug Fix: B&R Simulink Library V5.0.2 - supports Matlab from R2012b to R2015b - new Config Block User-Interface: model parameter setting can now be done in the Config Block V4.5.0 - Support for MATLAB 2015a - Functionblock can be added to a existing Library in Automation Studio - Simulink.Parameter and mpt.Parameter support in Workspace Variable Block - Support for B&R library guidelines compliant function block generation V4.4.1 - Bug fix Trialmode V4.4.0 Automation Studio Target for Simulink Version 4.4. supports the automatic code generation of MATLAB/Simulink 2014b as well as Simulink models using 'Model Referencing'. Thereby the time of code generation can be reduced dramatically (factor 10 to 100). Furthermore the Automation Studio Target for Simulink library has been extended around the block "Workspace Variable". The block provides the use of variables from the MATLAB workspace in generated tasks or function blocks in Automation Studio. V4.3.2 - Bug fixes V4.3.1 - Automation Studio Target for Simulink V4.3.1 supports automatic code generation from MATLAB R2014a. - Not only that, it also allows the use of reusable code for function block generation with MATLAB R2012b and higher and includes various bug fixes and other improvements. |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 6.4.0.89 | * | 29.03.2021 | 248 MB | EXE | Automation_Studio_Target_for_Simulink_6.4.0.exe | |
| Popis |
Automation Studio Target for Simulink B&R Automation Studio Target™ for Simulink provides an easy-to-use but powerful solution for implementing advanced closed-loop controllers on B&R hardware. Providing an additional Simulink blockset for variable and parameter exchange, B&R Automation Studio™ Target for Simulink supports the whole range of B&R hardware for integrated automation. At the push of a button, source code optimized for B&R target systems is generated and automatically embedded into an Automation Studio™ project. Standard variable interfaces guarantee real-time data exchange between automatically generated programs and parallel tasks. Revision history: V6.4.0 19/03/2021 - Support R2021a - Support stop for below R2018a - Codecompletion for B&R Config Block API - bugfix B&R Config Block Opening GUI on older MATLAB versions V6.3.1 15/12/2020 - feature Hot Plug Block: multiple Instances allowed - feature Hot Plug Block: new refresh factor editfield in GUI for setting update time - bugfix Hot Plug Block: if datatype is string, no error is thrown but a warning - bugfix Package field in B&R Config Block: SSC_includes is copied in root folder now - bugfix multidimensions in B&R Parameter block - bugfix B&R Config Block: now all 8 task classes are chooseable - bugfix B&R Config Block: ode1be solver now chooseable V6.3.0.68 30/10/2020 - Support R2020b - bugfix Hot Plug Block: Bus Element Variables not shown when declared as global - bugfix empty spaces in Bus Element Comments in .typ file not shown when generated as function block - german documentation revised - added SimScape pre-built library for faster compilation in AS project V6.2.2.59 28/08/2020 - bugfix Simulink I/Os - bugfix Simulink Parameter - bugfix Hot Plug Block Bus Detection - bugfix Hot Plug Block Ordering of Input and Output Ports - feature: Hot Plug Block Search for Variables - feature: Hot Plug Block Sort for Tasks - feature: Hot Plug Block Security with Username and Password (if in AS Project is a User added) - feature: Hot Plug Block Adding Bus Elements to Inport and/or Outport V6.2.1.48 07/07/2020 - feature: Multidimensional Array Support for Simulink.Parameter (flattened) - bugfix FUB generation: .typ file corrupted - bugfix empty space in variable name of a Simulink.Signal - bugfix FUB generation: Simulink.Parameter - bugfix different variable names for Simulink I/O and Simulink.Signal - bugfix Dimension in Bus Definition V6.2.0.43 28/05/2020 - bugfix in ConfigBlock GUI (reset of selection of Config name) - bugfix SimScape Codegeneration - bugfix Auto Transfer to real PLC - bugfix Simulink Web Interface (Subsystems) - added updated TechnologyGuard.exe V1.1.6.23 - Multidimensional Bus Elements now flattened in .typ file - new function Simulink Web Interface: multiple bus depth - support datatype STRING in B&R blocks V6.2.0.35 30/03/2020 - Support R2020a - bugfix B&R Input Block 1D-Array mismatch - new blocks for R2018a - R2020a: Extended Struct In/Out Block for selecting structures from .typ Files - Additional Files tab: Multiple selection of files - bugfix in bur_setup - additional infos in B&R comment header of generated files - added XLST files to sort XML generated files in same order than Automation Studio XML files - bugfix in relative path for Automation Studio - Enums in Busses support for Simulink I/Os and B&R Bus Input/Output blocks (also Data Dictionary support) V6.1.0 06/11/2019 - Support R2019b - No support earlier R2017a - refurbished Config block GUI - API for Config block - New Options in Config block: set Description for Task and Library, set Package for Task and Library (multiple depth) Expert Mode obsolete (always on), set Debugging flag for AS, set Preprocessing file - Option to create Simulink Parameter as AS variables - Option to create Simulink IOs as AS variables - Simulink Webview - Simulink Hot-Plug V6.0.2 - multidimensional array support for B&R Input, Output, Extended Input, Extended Output, Parameter Block - standard data types support for B&R Workspace Block - Stateflow ENUMs are generated as AS ENUMs when datatype is used in IO - bugfix for Simulink IOs as input of Environment Controller V6.0.1 - bugfix installer - bugfix multiple bus depth V6.0.0 - Important: New license mechanism and new licenses. Old licenses will not be supported. - Support Matlab R2019a - No support of Matlab Versions earlier R2016b - New installer: Installation without opening Matlab - Allow I/O Duplicates for Task - Allow I/O Duplicates for FUB resulting in VAR_IN_OUT variables in Automation Studio - New memory option 'reference' for Struct Block - Debugging option always ON for generated tasks/fubs - minor bugfixes V5.6.0 - Support Matlab R2018b - Support Data Dictionary for B&R Input, Output, Parameter, Workspace, Bus Input and Bus Output Block - Support Code Generation "Build Subsystem" - Support for standard Simulink I/O Blocks - minor bugfixes V5.5.0 - Support Matlab 2018a - Support for B&R automatic tranfer for ARSIM Version x.3x - Support for Matlab chances of External Mode - minor bugfixes - Update help V5.4.1 - Bug-Fix: Functionblock generation - B&R Parameterblock choosing bool generates Simulink Datatype boolean - Simscape Support for Matlab2017b - minor bugfixes V5.4.0 - Support Matlab 2017b - Silent Mode is available via B&R Config Block - Advanced Settings - B&R Structure Block supports Array of Structure - B&R Config Block handles the configuration of referenced models, no referenced configuration necessary anymore - minor bugfixes V5.3.1 - Missing structures for functionsblocks fixed - Support for AS 3.0.90 fixed - Enhanced structure recognition for functionblock generation - minor bugfixes V5.3.0 - Support Matlab R2017a - Enhanced function block generation - Bug fix: wrong error message for invalid Automation Studio project path corrected - Bug fix: Errors during code generation when target package contains dependencies - minor bugfixes V5.2.2 - Rework B&R Parameter Block - Rework B&R Bus Block - Rework B&R Extended Block V5.2.1 - Bug fix: Prearrangements and settings checked earlier to prohibit error messages during code generation process - Bug fix: Opening B&R Input and Output blocks doesn't cause error messages when there is no B&R configuration (block) V5.2.0 - Support Matlab R2016b - New Example for Simulink Multibody 'Steward Platform' - New helpfunction bur_setup - Parallel installation of 5.2.x with previous Automation Studio Target for Simulink Versions - No standard support for Automation Studio 3.0.81 - minor bugfixes V5.1.1 - Bug Fix: Zip Package of a model with Model Referencing - Config Block: Syntax check of version number - minor bugfixes V5.1.0 - Support Matlab R2016a - New Layout of the B&R Simulink Library Blocks - The functionality "Additional Files" supports relative paths - minor bugfixes V5.0.4 - Improved parameter check in config block - Bug Fix: FB generation - Bug Fix: Zip Package creation - Bug Fix: Warning message handling - Bug Fix: Error message handling - Bug Fix: Config-Block GUI - minor bugfixes V5.0.3 - Automatically add needed B&R standard libraries - Bug Fix: Codegeneration of a function block in an existing libary - Bug Fix: Model Referencing - Bug Fix: B&R Simulink Library V5.0.2 - supports Matlab from R2012b to R2015b - new Config Block User-Interface: model parameter setting can now be done in the Config Block V4.5.0 - Support for MATLAB 2015a - Functionblock can be added to a existing Library in Automation Studio - Simulink.Parameter and mpt.Parameter support in Workspace Variable Block - Support for B&R library guidelines compliant function block generation V4.4.1 - Bug fix Trialmode V4.4.0 Automation Studio Target for Simulink Version 4.4. supports the automatic code generation of MATLAB/Simulink 2014b as well as Simulink models using 'Model Referencing'. Thereby the time of code generation can be reduced dramatically (factor 10 to 100). Furthermore the Automation Studio Target for Simulink library has been extended around the block "Workspace Variable". The block provides the use of variables from the MATLAB workspace in generated tasks or function blocks in Automation Studio. V4.3.2 - Bug fixes V4.3.1 - Automation Studio Target for Simulink V4.3.1 supports automatic code generation from MATLAB R2014a. - Not only that, it also allows the use of reusable code for function block generation with MATLAB R2012b and higher and includes various bug fixes and other improvements. |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 6.3.1.79 | * | 05.01.2021 | 247 MB | EXE | Automation_Studio_Target_for_Simulink_6.3.1.exe | |
| Popis |
Automation Studio Target for Simulink B&R Automation Studio Target™ for Simulink provides an easy-to-use but powerful solution for implementing advanced closed-loop controllers on B&R hardware. Providing an additional Simulink blockset for variable and parameter exchange, B&R Automation Studio™ Target for Simulink supports the whole range of B&R hardware for integrated automation. At the push of a button, source code optimized for B&R target systems is generated and automatically embedded into an Automation Studio™ project. Standard variable interfaces guarantee real-time data exchange between automatically generated programs and parallel tasks. Revision history: V6.3.1 15/12/2020 - feature Hot Plug Block: multiple Instances allowed - feature Hot Plug Block: new refresh factor editfield in GUI for setting update time - bugfix Hot Plug Block: if datatype is string, no error is thrown but a warning - bugfix Package field in B&R Config Block: SSC_includes is copied in root folder now - bugfix multidimensions in B&R Parameter block - bugfix B&R Config Block: now all 8 task classes are chooseable - bugfix B&R Config Block: ode1be solver now chooseable V6.3.0.68 30/10/2020 - Support R2020b - bugfix Hot Plug Block: Bus Element Variables not shown when declared as global - bugfix empty spaces in Bus Element Comments in .typ file not shown when generated as function block - german documentation revised - added SimScape pre-built library for faster compilation in AS project V6.2.2.59 28/08/2020 - bugfix Simulink I/Os - bugfix Simulink Parameter - bugfix Hot Plug Block Bus Detection - bugfix Hot Plug Block Ordering of Input and Output Ports - feature: Hot Plug Block Search for Variables - feature: Hot Plug Block Sort for Tasks - feature: Hot Plug Block Security with Username and Password (if in AS Project is a User added) - feature: Hot Plug Block Adding Bus Elements to Inport and/or Outport V6.2.1.48 07/07/2020 - feature: Multidimensional Array Support for Simulink.Parameter (flattened) - bugfix FUB generation: .typ file corrupted - bugfix empty space in variable name of a Simulink.Signal - bugfix FUB generation: Simulink.Parameter - bugfix different variable names for Simulink I/O and Simulink.Signal - bugfix Dimension in Bus Definition V6.2.0.43 28/05/2020 - bugfix in ConfigBlock GUI (reset of selection of Config name) - bugfix SimScape Codegeneration - bugfix Auto Transfer to real PLC - bugfix Simulink Web Interface (Subsystems) - added updated TechnologyGuard.exe V1.1.6.23 - Multidimensional Bus Elements now flattened in .typ file - new function Simulink Web Interface: multiple bus depth - support datatype STRING in B&R blocks V6.2.0.35 30/03/2020 - Support R2020a - bugfix B&R Input Block 1D-Array mismatch - new blocks for R2018a - R2020a: Extended Struct In/Out Block for selecting structures from .typ Files - Additional Files tab: Multiple selection of files - bugfix in bur_setup - additional infos in B&R comment header of generated files - added XLST files to sort XML generated files in same order than Automation Studio XML files - bugfix in relative path for Automation Studio - Enums in Busses support for Simulink I/Os and B&R Bus Input/Output blocks (also Data Dictionary support) V6.1.0 06/11/2019 - Support R2019b - No support earlier R2017a - refurbished Config block GUI - API for Config block - New Options in Config block: set Description for Task and Library, set Package for Task and Library (multiple depth) Expert Mode obsolete (always on), set Debugging flag for AS, set Preprocessing file - Option to create Simulink Parameter as AS variables - Option to create Simulink IOs as AS variables - Simulink Webview - Simulink Hot-Plug V6.0.2 - multidimensional array support for B&R Input, Output, Extended Input, Extended Output, Parameter Block - standard data types support for B&R Workspace Block - Stateflow ENUMs are generated as AS ENUMs when datatype is used in IO - bugfix for Simulink IOs as input of Environment Controller V6.0.1 - bugfix installer - bugfix multiple bus depth V6.0.0 - Important: New license mechanism and new licenses. Old licenses will not be supported. - Support Matlab R2019a - No support of Matlab Versions earlier R2016b - New installer: Installation without opening Matlab - Allow I/O Duplicates for Task - Allow I/O Duplicates for FUB resulting in VAR_IN_OUT variables in Automation Studio - New memory option 'reference' for Struct Block - Debugging option always ON for generated tasks/fubs - minor bugfixes V5.6.0 - Support Matlab R2018b - Support Data Dictionary for B&R Input, Output, Parameter, Workspace, Bus Input and Bus Output Block - Support Code Generation "Build Subsystem" - Support for standard Simulink I/O Blocks - minor bugfixes V5.5.0 - Support Matlab 2018a - Support for B&R automatic tranfer for ARSIM Version x.3x - Support for Matlab chances of External Mode - minor bugfixes - Update help V5.4.1 - Bug-Fix: Functionblock generation - B&R Parameterblock choosing bool generates Simulink Datatype boolean - Simscape Support for Matlab2017b - minor bugfixes V5.4.0 - Support Matlab 2017b - Silent Mode is available via B&R Config Block - Advanced Settings - B&R Structure Block supports Array of Structure - B&R Config Block handles the configuration of referenced models, no referenced configuration necessary anymore - minor bugfixes V5.3.1 - Missing structures for functionsblocks fixed - Support for AS 3.0.90 fixed - Enhanced structure recognition for functionblock generation - minor bugfixes V5.3.0 - Support Matlab R2017a - Enhanced function block generation - Bug fix: wrong error message for invalid Automation Studio project path corrected - Bug fix: Errors during code generation when target package contains dependencies - minor bugfixes V5.2.2 - Rework B&R Parameter Block - Rework B&R Bus Block - Rework B&R Extended Block V5.2.1 - Bug fix: Prearrangements and settings checked earlier to prohibit error messages during code generation process - Bug fix: Opening B&R Input and Output blocks doesn't cause error messages when there is no B&R configuration (block) V5.2.0 - Support Matlab R2016b - New Example for Simulink Multibody 'Steward Platform' - New helpfunction bur_setup - Parallel installation of 5.2.x with previous Automation Studio Target for Simulink Versions - No standard support for Automation Studio 3.0.81 - minor bugfixes V5.1.1 - Bug Fix: Zip Package of a model with Model Referencing - Config Block: Syntax check of version number - minor bugfixes V5.1.0 - Support Matlab R2016a - New Layout of the B&R Simulink Library Blocks - The functionality "Additional Files" supports relative paths - minor bugfixes V5.0.4 - Improved parameter check in config block - Bug Fix: FB generation - Bug Fix: Zip Package creation - Bug Fix: Warning message handling - Bug Fix: Error message handling - Bug Fix: Config-Block GUI - minor bugfixes V5.0.3 - Automatically add needed B&R standard libraries - Bug Fix: Codegeneration of a function block in an existing libary - Bug Fix: Model Referencing - Bug Fix: B&R Simulink Library V5.0.2 - supports Matlab from R2012b to R2015b - new Config Block User-Interface: model parameter setting can now be done in the Config Block V4.5.0 - Support for MATLAB 2015a - Functionblock can be added to a existing Library in Automation Studio - Simulink.Parameter and mpt.Parameter support in Workspace Variable Block - Support for B&R library guidelines compliant function block generation V4.4.1 - Bug fix Trialmode V4.4.0 Automation Studio Target for Simulink Version 4.4. supports the automatic code generation of MATLAB/Simulink 2014b as well as Simulink models using 'Model Referencing'. Thereby the time of code generation can be reduced dramatically (factor 10 to 100). Furthermore the Automation Studio Target for Simulink library has been extended around the block "Workspace Variable". The block provides the use of variables from the MATLAB workspace in generated tasks or function blocks in Automation Studio. V4.3.2 - Bug fixes V4.3.1 - Automation Studio Target for Simulink V4.3.1 supports automatic code generation from MATLAB R2014a. - Not only that, it also allows the use of reusable code for function block generation with MATLAB R2012b and higher and includes various bug fixes and other improvements. |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 6.3.0.68 | * | 02.11.2020 | 192 MB | EXE | Automation_Studio_Target_for_Simulink_6.3.0.exe | |
| Popis |
Automation Studio Target for Simulink B&R Automation Studio Target™ for Simulink provides an easy-to-use but powerful solution for implementing advanced closed-loop controllers on B&R hardware. Providing an additional Simulink blockset for variable and parameter exchange, B&R Automation Studio™ Target for Simulink supports the whole range of B&R hardware for integrated automation. At the push of a button, source code optimized for B&R target systems is generated and automatically embedded into an Automation Studio™ project. Standard variable interfaces guarantee real-time data exchange between automatically generated programs and parallel tasks. Revision history: V6.3.0.68 30/10/2020 - Support R2020b - bugfix Hot Plug Block: Bus Element Variables not shown when declared as global - bugfix empty spaces in Bus Element Comments in .typ file not shown when generated as function block - german documentation revised - added SimScape pre-built library for faster compilation in AS project V6.2.2.59 28/08/2020 - bugfix Simulink I/Os - bugfix Simulink Parameter - bugfix Hot Plug Block Bus Detection - bugfix Hot Plug Block Ordering of Input and Output Ports - feature: Hot Plug Block Search for Variables - feature: Hot Plug Block Sort for Tasks - feature: Hot Plug Block Security with Username and Password (if in AS Project is a User added) - feature: Hot Plug Block Adding Bus Elements to Inport and/or Outport V6.2.1.48 07/07/2020 - feature: Multidimensional Array Support for Simulink.Parameter (flattened) - bugfix FUB generation: .typ file corrupted - bugfix empty space in variable name of a Simulink.Signal - bugfix FUB generation: Simulink.Parameter - bugfix different variable names for Simulink I/O and Simulink.Signal - bugfix Dimension in Bus Definition V6.2.0.43 28/05/2020 - bugfix in ConfigBlock GUI (reset of selection of Config name) - bugfix SimScape Codegeneration - bugfix Auto Transfer to real PLC - bugfix Simulink Web Interface (Subsystems) - added updated TechnologyGuard.exe V1.1.6.23 - Multidimensional Bus Elements now flattened in .typ file - new function Simulink Web Interface: multiple bus depth - support datatype STRING in B&R blocks V6.2.0.35 30/03/2020 - Support R2020a - bugfix B&R Input Block 1D-Array mismatch - new blocks for R2018a - R2020a: Extended Struct In/Out Block for selecting structures from .typ Files - Additional Files tab: Multiple selection of files - bugfix in bur_setup - additional infos in B&R comment header of generated files - added XLST files to sort XML generated files in same order than Automation Studio XML files - bugfix in relative path for Automation Studio - Enums in Busses support for Simulink I/Os and B&R Bus Input/Output blocks (also Data Dictionary support) V6.1.0 06/11/2019 - Support R2019b - No support earlier R2017a - refurbished Config block GUI - API for Config block - New Options in Config block: set Description for Task and Library, set Package for Task and Library (multiple depth) Expert Mode obsolete (always on), set Debugging flag for AS, set Preprocessing file - Option to create Simulink Parameter as AS variables - Option to create Simulink IOs as AS variables - Simulink Webview - Simulink Hot-Plug V6.0.2 - multidimensional array support for B&R Input, Output, Extended Input, Extended Output, Parameter Block - standard data types support for B&R Workspace Block - Stateflow ENUMs are generated as AS ENUMs when datatype is used in IO - bugfix for Simulink IOs as input of Environment Controller V6.0.1 - bugfix installer - bugfix multiple bus depth V6.0.0 - Important: New license mechanism and new licenses. Old licenses will not be supported. - Support Matlab R2019a - No support of Matlab Versions earlier R2016b - New installer: Installation without opening Matlab - Allow I/O Duplicates for Task - Allow I/O Duplicates for FUB resulting in VAR_IN_OUT variables in Automation Studio - New memory option 'reference' for Struct Block - Debugging option always ON for generated tasks/fubs - minor bugfixes V5.6.0 - Support Matlab R2018b - Support Data Dictionary for B&R Input, Output, Parameter, Workspace, Bus Input and Bus Output Block - Support Code Generation "Build Subsystem" - Support for standard Simulink I/O Blocks - minor bugfixes V5.5.0 - Support Matlab 2018a - Support for B&R automatic tranfer for ARSIM Version x.3x - Support for Matlab chances of External Mode - minor bugfixes - Update help V5.4.1 - Bug-Fix: Functionblock generation - B&R Parameterblock choosing bool generates Simulink Datatype boolean - Simscape Support for Matlab2017b - minor bugfixes V5.4.0 - Support Matlab 2017b - Silent Mode is available via B&R Config Block - Advanced Settings - B&R Structure Block supports Array of Structure - B&R Config Block handles the configuration of referenced models, no referenced configuration necessary anymore - minor bugfixes V5.3.1 - Missing structures for functionsblocks fixed - Support for AS 3.0.90 fixed - Enhanced structure recognition for functionblock generation - minor bugfixes V5.3.0 - Support Matlab R2017a - Enhanced function block generation - Bug fix: wrong error message for invalid Automation Studio project path corrected - Bug fix: Errors during code generation when target package contains dependencies - minor bugfixes V5.2.2 - Rework B&R Parameter Block - Rework B&R Bus Block - Rework B&R Extended Block V5.2.1 - Bug fix: Prearrangements and settings checked earlier to prohibit error messages during code generation process - Bug fix: Opening B&R Input and Output blocks doesn't cause error messages when there is no B&R configuration (block) V5.2.0 - Support Matlab R2016b - New Example for Simulink Multibody 'Steward Platform' - New helpfunction bur_setup - Parallel installation of 5.2.x with previous Automation Studio Target for Simulink Versions - No standard support for Automation Studio 3.0.81 - minor bugfixes V5.1.1 - Bug Fix: Zip Package of a model with Model Referencing - Config Block: Syntax check of version number - minor bugfixes V5.1.0 - Support Matlab R2016a - New Layout of the B&R Simulink Library Blocks - The functionality "Additional Files" supports relative paths - minor bugfixes V5.0.4 - Improved parameter check in config block - Bug Fix: FB generation - Bug Fix: Zip Package creation - Bug Fix: Warning message handling - Bug Fix: Error message handling - Bug Fix: Config-Block GUI - minor bugfixes V5.0.3 - Automatically add needed B&R standard libraries - Bug Fix: Codegeneration of a function block in an existing libary - Bug Fix: Model Referencing - Bug Fix: B&R Simulink Library V5.0.2 - supports Matlab from R2012b to R2015b - new Config Block User-Interface: model parameter setting can now be done in the Config Block V4.5.0 - Support for MATLAB 2015a - Functionblock can be added to a existing Library in Automation Studio - Simulink.Parameter and mpt.Parameter support in Workspace Variable Block - Support for B&R library guidelines compliant function block generation V4.4.1 - Bug fix Trialmode V4.4.0 Automation Studio Target for Simulink Version 4.4. supports the automatic code generation of MATLAB/Simulink 2014b as well as Simulink models using 'Model Referencing'. Thereby the time of code generation can be reduced dramatically (factor 10 to 100). Furthermore the Automation Studio Target for Simulink library has been extended around the block "Workspace Variable". The block provides the use of variables from the MATLAB workspace in generated tasks or function blocks in Automation Studio. V4.3.2 - Bug fixes V4.3.1 - Automation Studio Target for Simulink V4.3.1 supports automatic code generation from MATLAB R2014a. - Not only that, it also allows the use of reusable code for function block generation with MATLAB R2012b and higher and includes various bug fixes and other improvements. |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 6.2.2.59 | * | 01.09.2020 | 192 MB | EXE | Automation_Studio_Target_for_Simulink_6.2.2.exe | |
| Popis |
Automation Studio Target for Simulink B&R Automation Studio Target™ for Simulink provides an easy-to-use but powerful solution for implementing advanced closed-loop controllers on B&R hardware. Providing an additional Simulink blockset for variable and parameter exchange, B&R Automation Studio™ Target for Simulink supports the whole range of B&R hardware for integrated automation. At the push of a button, source code optimized for B&R target systems is generated and automatically embedded into an Automation Studio™ project. Standard variable interfaces guarantee real-time data exchange between automatically generated programs and parallel tasks. Revision history: V6.2.2.59 28/08/2020 - bugfix Simulink I/Os - bugfix Simulink Parameter - bugfix Hot Plug Block Bus Detection - bugfix Hot Plug Block Ordering of Input and Output Ports - feature: Hot Plug Block Search for Variables - feature: Hot Plug Block Sort for Tasks - feature: Hot Plug Block Security with Username and Password (if in AS Project is a User added) - feature: Hot Plug Block Adding Bus Elements to Inport and/or Outport V6.2.1.48 07/07/2020 - feature: Multidimensional Array Support for Simulink.Parameter (flattened) - bugfix FUB generation: .typ file corrupted - bugfix empty space in variable name of a Simulink.Signal - bugfix FUB generation: Simulink.Parameter - bugfix different variable names for Simulink I/O and Simulink.Signal - bugfix Dimension in Bus Definition V6.2.0.43 28/05/2020 - bugfix in ConfigBlock GUI (reset of selection of Config name) - bugfix SimScape Codegeneration - bugfix Auto Transfer to real PLC - bugfix Simulink Web Interface (Subsystems) - added updated TechnologyGuard.exe V1.1.6.23 - Multidimensional Bus Elements now flattened in .typ file - new function Simulink Web Interface: multiple bus depth - support datatype STRING in B&R blocks V6.2.0.35 30/03/2020 - Support R2020a - bugfix B&R Input Block 1D-Array mismatch - new blocks for R2018a - R2020a: Extended Struct In/Out Block for selecting structures from .typ Files - Additional Files tab: Multiple selection of files - bugfix in bur_setup - additional infos in B&R comment header of generated files - added XLST files to sort XML generated files in same order than Automation Studio XML files - bugfix in relative path for Automation Studio - Enums in Busses support for Simulink I/Os and B&R Bus Input/Output blocks (also Data Dictionary support) V6.1.0 06/11/2019 - Support R2019b - No support earlier R2017a - refurbished Config block GUI - API for Config block - New Options in Config block: set Description for Task and Library, set Package for Task and Library (multiple depth) Expert Mode obsolete (always on), set Debugging flag for AS, set Preprocessing file - Option to create Simulink Parameter as AS variables - Option to create Simulink IOs as AS variables - Simulink Webview - Simulink Hot-Plug V6.0.2 - multidimensional array support for B&R Input, Output, Extended Input, Extended Output, Parameter Block - standard data types support for B&R Workspace Block - Stateflow ENUMs are generated as AS ENUMs when datatype is used in IO - bugfix for Simulink IOs as input of Environment Controller V6.0.1 - bugfix installer - bugfix multiple bus depth V6.0.0 - Important: New license mechanism and new licenses. Old licenses will not be supported. - Support Matlab R2019a - No support of Matlab Versions earlier R2016b - New installer: Installation without opening Matlab - Allow I/O Duplicates for Task - Allow I/O Duplicates for FUB resulting in VAR_IN_OUT variables in Automation Studio - New memory option 'reference' for Struct Block - Debugging option always ON for generated tasks/fubs - minor bugfixes V5.6.0 - Support Matlab R2018b - Support Data Dictionary for B&R Input, Output, Parameter, Workspace, Bus Input and Bus Output Block - Support Code Generation "Build Subsystem" - Support for standard Simulink I/O Blocks - minor bugfixes V5.5.0 - Support Matlab 2018a - Support for B&R automatic tranfer for ARSIM Version x.3x - Support for Matlab chances of External Mode - minor bugfixes - Update help V5.4.1 - Bug-Fix: Functionblock generation - B&R Parameterblock choosing bool generates Simulink Datatype boolean - Simscape Support for Matlab2017b - minor bugfixes V5.4.0 - Support Matlab 2017b - Silent Mode is available via B&R Config Block - Advanced Settings - B&R Structure Block supports Array of Structure - B&R Config Block handles the configuration of referenced models, no referenced configuration necessary anymore - minor bugfixes V5.3.1 - Missing structures for functionsblocks fixed - Support for AS 3.0.90 fixed - Enhanced structure recognition for functionblock generation - minor bugfixes V5.3.0 - Support Matlab R2017a - Enhanced function block generation - Bug fix: wrong error message for invalid Automation Studio project path corrected - Bug fix: Errors during code generation when target package contains dependencies - minor bugfixes V5.2.2 - Rework B&R Parameter Block - Rework B&R Bus Block - Rework B&R Extended Block V5.2.1 - Bug fix: Prearrangements and settings checked earlier to prohibit error messages during code generation process - Bug fix: Opening B&R Input and Output blocks doesn't cause error messages when there is no B&R configuration (block) V5.2.0 - Support Matlab R2016b - New Example for Simulink Multibody 'Steward Platform' - New helpfunction bur_setup - Parallel installation of 5.2.x with previous Automation Studio Target for Simulink Versions - No standard support for Automation Studio 3.0.81 - minor bugfixes V5.1.1 - Bug Fix: Zip Package of a model with Model Referencing - Config Block: Syntax check of version number - minor bugfixes V5.1.0 - Support Matlab R2016a - New Layout of the B&R Simulink Library Blocks - The functionality "Additional Files" supports relative paths - minor bugfixes V5.0.4 - Improved parameter check in config block - Bug Fix: FB generation - Bug Fix: Zip Package creation - Bug Fix: Warning message handling - Bug Fix: Error message handling - Bug Fix: Config-Block GUI - minor bugfixes V5.0.3 - Automatically add needed B&R standard libraries - Bug Fix: Codegeneration of a function block in an existing libary - Bug Fix: Model Referencing - Bug Fix: B&R Simulink Library V5.0.2 - supports Matlab from R2012b to R2015b - new Config Block User-Interface: model parameter setting can now be done in the Config Block V4.5.0 - Support for MATLAB 2015a - Functionblock can be added to a existing Library in Automation Studio - Simulink.Parameter and mpt.Parameter support in Workspace Variable Block - Support for B&R library guidelines compliant function block generation V4.4.1 - Bug fix Trialmode V4.4.0 Automation Studio Target for Simulink Version 4.4. supports the automatic code generation of MATLAB/Simulink 2014b as well as Simulink models using 'Model Referencing'. Thereby the time of code generation can be reduced dramatically (factor 10 to 100). Furthermore the Automation Studio Target for Simulink library has been extended around the block "Workspace Variable". The block provides the use of variables from the MATLAB workspace in generated tasks or function blocks in Automation Studio. V4.3.2 - Bug fixes V4.3.1 - Automation Studio Target for Simulink V4.3.1 supports automatic code generation from MATLAB R2014a. - Not only that, it also allows the use of reusable code for function block generation with MATLAB R2012b and higher and includes various bug fixes and other improvements. |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 6.2.1.48 | * | 08.07.2020 | 192 MB | EXE | Automation_Studio_Target_for_Simulink_6.2.1.exe | |
| Popis |
Automation Studio Target for Simulink B&R Automation Studio Target™ for Simulink provides an easy-to-use but powerful solution for implementing advanced closed-loop controllers on B&R hardware. Providing an additional Simulink blockset for variable and parameter exchange, B&R Automation Studio™ Target for Simulink supports the whole range of B&R hardware for integrated automation. At the push of a button, source code optimized for B&R target systems is generated and automatically embedded into an Automation Studio™ project. Standard variable interfaces guarantee real-time data exchange between automatically generated programs and parallel tasks. Revision history: V6.2.1.48 07/07/2020 - feature: Multidimensional Array Support for Simulink.Parameter (flattened) - bugfix FUB generation: .typ file corrupted - bugfix empty space in variable name of a Simulink.Signal - bugfix FUB generation: Simulink.Parameter - bugfix different variable names for Simulink I/O and Simulink.Signal - bugfix Dimension in Bus Definition V6.2.0.43 28/05/2020 - bugfix in ConfigBlock GUI (reset of selection of Config name) - bugfix SimScape Codegeneration - bugfix Auto Transfer to real PLC - bugfix Simulink Web Interface (Subsystems) - added updated TechnologyGuard.exe V1.1.6.23 - Multidimensional Bus Elements now flattened in .typ file - new function Simulink Web Interface: multiple bus depth - support datatype STRING in B&R blocks V6.2.0.35 30/03/2020 - Support R2020a - bugfix B&R Input Block 1D-Array mismatch - new blocks for R2018a - R2020a: Extended Struct In/Out Block for selecting structures from .typ Files - Additional Files tab: Multiple selection of files - bugfix in bur_setup - additional infos in B&R comment header of generated files - added XLST files to sort XML generated files in same order than Automation Studio XML files - bugfix in relative path for Automation Studio - Enums in Busses support for Simulink I/Os and B&R Bus Input/Output blocks (also Data Dictionary support) V6.1.0 06/11/2019 - Support R2019b - No support earlier R2017a - refurbished Config block GUI - API for Config block - New Options in Config block: set Description for Task and Library, set Package for Task and Library (multiple depth) Expert Mode obsolete (always on), set Debugging flag for AS, set Preprocessing file - Option to create Simulink Parameter as AS variables - Option to create Simulink IOs as AS variables - Simulink Webview - Simulink Hot-Plug V6.0.2 - multidimensional array support for B&R Input, Output, Extended Input, Extended Output, Parameter Block - standard data types support for B&R Workspace Block - Stateflow ENUMs are generated as AS ENUMs when datatype is used in IO - bugfix for Simulink IOs as input of Environment Controller V6.0.1 - bugfix installer - bugfix multiple bus depth V6.0.0 - Important: New license mechanism and new licenses. Old licenses will not be supported. - Support Matlab R2019a - No support of Matlab Versions earlier R2016b - New installer: Installation without opening Matlab - Allow I/O Duplicates for Task - Allow I/O Duplicates for FUB resulting in VAR_IN_OUT variables in Automation Studio - New memory option 'reference' for Struct Block - Debugging option always ON for generated tasks/fubs - minor bugfixes V5.6.0 - Support Matlab R2018b - Support Data Dictionary for B&R Input, Output, Parameter, Workspace, Bus Input and Bus Output Block - Support Code Generation "Build Subsystem" - Support for standard Simulink I/O Blocks - minor bugfixes V5.5.0 - Support Matlab 2018a - Support for B&R automatic tranfer for ARSIM Version x.3x - Support for Matlab chances of External Mode - minor bugfixes - Update help V5.4.1 - Bug-Fix: Functionblock generation - B&R Parameterblock choosing bool generates Simulink Datatype boolean - Simscape Support for Matlab2017b - minor bugfixes V5.4.0 - Support Matlab 2017b - Silent Mode is available via B&R Config Block - Advanced Settings - B&R Structure Block supports Array of Structure - B&R Config Block handles the configuration of referenced models, no referenced configuration necessary anymore - minor bugfixes V5.3.1 - Missing structures for functionsblocks fixed - Support for AS 3.0.90 fixed - Enhanced structure recognition for functionblock generation - minor bugfixes V5.3.0 - Support Matlab R2017a - Enhanced function block generation - Bug fix: wrong error message for invalid Automation Studio project path corrected - Bug fix: Errors during code generation when target package contains dependencies - minor bugfixes V5.2.2 - Rework B&R Parameter Block - Rework B&R Bus Block - Rework B&R Extended Block V5.2.1 - Bug fix: Prearrangements and settings checked earlier to prohibit error messages during code generation process - Bug fix: Opening B&R Input and Output blocks doesn't cause error messages when there is no B&R configuration (block) V5.2.0 - Support Matlab R2016b - New Example for Simulink Multibody 'Steward Platform' - New helpfunction bur_setup - Parallel installation of 5.2.x with previous Automation Studio Target for Simulink Versions - No standard support for Automation Studio 3.0.81 - minor bugfixes V5.1.1 - Bug Fix: Zip Package of a model with Model Referencing - Config Block: Syntax check of version number - minor bugfixes V5.1.0 - Support Matlab R2016a - New Layout of the B&R Simulink Library Blocks - The functionality "Additional Files" supports relative paths - minor bugfixes V5.0.4 - Improved parameter check in config block - Bug Fix: FB generation - Bug Fix: Zip Package creation - Bug Fix: Warning message handling - Bug Fix: Error message handling - Bug Fix: Config-Block GUI - minor bugfixes V5.0.3 - Automatically add needed B&R standard libraries - Bug Fix: Codegeneration of a function block in an existing libary - Bug Fix: Model Referencing - Bug Fix: B&R Simulink Library V5.0.2 - supports Matlab from R2012b to R2015b - new Config Block User-Interface: model parameter setting can now be done in the Config Block V4.5.0 - Support for MATLAB 2015a - Functionblock can be added to a existing Library in Automation Studio - Simulink.Parameter and mpt.Parameter support in Workspace Variable Block - Support for B&R library guidelines compliant function block generation V4.4.1 - Bug fix Trialmode V4.4.0 Automation Studio Target for Simulink Version 4.4. supports the automatic code generation of MATLAB/Simulink 2014b as well as Simulink models using 'Model Referencing'. Thereby the time of code generation can be reduced dramatically (factor 10 to 100). Furthermore the Automation Studio Target for Simulink library has been extended around the block "Workspace Variable". The block provides the use of variables from the MATLAB workspace in generated tasks or function blocks in Automation Studio. V4.3.2 - Bug fixes V4.3.1 - Automation Studio Target for Simulink V4.3.1 supports automatic code generation from MATLAB R2014a. - Not only that, it also allows the use of reusable code for function block generation with MATLAB R2012b and higher and includes various bug fixes and other improvements. |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 5.6.0 | * | 23.10.2018 | 184 MB | ZIP | Automation_Studio_Target_for_Simulink.zip | |
| Popis |
Automation Studio Target for Simulink B&R Automation Studio Target™ for Simulink provides an easy-to-use but powerful solution for implementing advanced closed-loop controllers on B&R hardware. Providing an additional Simulink blockset for variable and parameter exchange, B&R Automation Studio™ Target for Simulink supports the whole range of B&R hardware for integrated automation. At the push of a button, source code optimized for B&R target systems is generated and automatically embedded into an Automation Studio™ project. Standard variable interfaces guarantee real-time data exchange between automatically generated programs and parallel tasks. Revision history: V5.6.0 - Support Matlab R2018b - Support Data Dictionary for B&R Input, Output, Parameter, Workspace, Bus Input and Bus Output Block - Support Code Generation "Build Subsystem" - Support for standard Simulink I/O Blocks - minor bugfixes V5.5.0 - Support Matlab 2018a - Support for B&R automatic tranfer for ARSIM Version x.3x - Support for Matlab chances of External Mode - minor bugfixes - Update help V5.4.1 - Bug-Fix: Functionblock generation - B&R Parameterblock choosing bool generates Simulink Datatype boolean - Simscape Support for Matlab2017b - minor bugfixes V5.4.0 - Support Matlab 2017b - Silent Mode is available via B&R Config Block - Advanced Settings - B&R Structure Block supports Array of Structure - B&R Config Block handles the configuration of referenced models, no referenced configuration necessary anymore - minor bugfixes V5.3.1 - Missing structures for functionsblocks fixed - Support for AS 3.0.90 fixed - Enhanced structure recognition for functionblock generation - minor bugfixes V5.3.0 - Support Matlab R2017a - Enhanced function block generation - Bug fix: wrong error message for invalid Automation Studio project path corrected - Bug fix: Errors during code generation when target package contains dependencies - minor bugfixes V5.2.2 - Rework B&R Parameter Block - Rework B&R Bus Block - Rework B&R Extended Block V5.2.1 - Bug fix: Prearrangements and settings checked earlier to prohibit error messages during code generation process - Bug fix: Opening B&R Input and Output blocks doesn't cause error messages when there is no B&R configuration (block) V5.2.0 - Support Matlab R2016b - New Example for Simulink Multibody 'Steward Platform' - New helpfunction bur_setup - Parallel installation of 5.2.x with previous Automation Studio Target for Simulink Versions - No standard support for Automation Studio 3.0.81 - minor bugfixes V5.1.1 - Bug Fix: Zip Package of a model with Model Referencing - Config Block: Syntax check of version number - minor bugfixes V5.1.0 - Support Matlab R2016a - New Layout of the B&R Simulink Library Blocks - The functionality "Additional Files" supports relative paths - minor bugfixes V5.0.4 - Improved parameter check in config block - Bug Fix: FB generation - Bug Fix: Zip Package creation - Bug Fix: Warning message handling - Bug Fix: Error message handling - Bug Fix: Config-Block GUI - minor bugfixes V5.0.3 - Automatically add needed B&R standard libraries - Bug Fix: Codegeneration of a function block in an existing libary - Bug Fix: Model Referencing - Bug Fix: B&R Simulink Library V5.0.2 - supports Matlab from R2012b to R2015b - new Config Block User-Interface: model parameter setting can now be done in the Config Block V4.5.0 - Support for MATLAB 2015a - Functionblock can be added to a existing Library in Automation Studio - Simulink.Parameter and mpt.Parameter support in Workspace Variable Block - Support for B&R library guidelines compliant function block generation V4.4.1 - Bug fix Trialmode V4.4.0 Automation Studio Target for Simulink Version 4.4. supports the automatic code generation of MATLAB/Simulink 2014b as well as Simulink models using 'Model Referencing'. Thereby the time of code generation can be reduced dramatically (factor 10 to 100). Furthermore the Automation Studio Target for Simulink library has been extended around the block "Workspace Variable". The block provides the use of variables from the MATLAB workspace in generated tasks or function blocks in Automation Studio. V4.3.2 - Bug fixes V4.3.1 - Automation Studio Target for Simulink V4.3.1 supports automatic code generation from MATLAB R2014a. - Not only that, it also allows the use of reusable code for function block generation with MATLAB R2012b and higher and includes various bug fixes and other improvements. |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 4.5.0 | * | 07.05.2015 | 49 MB | ZIP | Automation_Studio_Target_for_Simulink_V4.5.0.zip | |
| Popis |
Automation Studio Target for Simulink B&R Automation Studio Target™ for Simulink provides an easy-to-use but powerful solution for implementing advanced closed-loop controllers on B&R hardware. Providing an additional Simulink blockset for variable and parameter exchange, B&R Automation Studio™ Target for Simulink supports the whole range of B&R hardware for integrated automation. At the push of a button, source code optimized for B&R target systems is generated and automatically embedded into an Automation Studio™ project. Standard variable interfaces guarantee real-time data exchange between automatically generated programs and parallel tasks. Revision history: V4.5.0 - Support for MATLAB 2015a - Functionblock can be added to a existing Library in Automation Studio - Simulink.Parameter and mpt.Parameter support in Workspace Variable Block - Support for B&R library guidelines compliant function block generation V4.4.1 - Bug fix Trialmode V4.4.0 Automation Studio Target for Simulink Version 4.4. supports the automatic code generation of MATLAB/Simulink 2014b as well as Simulink models using 'Model Referencing'. Thereby the time of code generation can be reduced dramatically (factor 10 to 100). Furthermore the Automation Studio Target for Simulink library has been extended around the block "Workspace Variable". The block provides the use of variables from the MATLAB workspace in generated tasks or function blocks in Automation Studio. V4.3.2 - Bug fixes V4.3.1 - Automation Studio Target for Simulink V4.3.1 supports automatic code generation from MATLAB R2014a. - Not only that, it also allows the use of reusable code for function block generation with MATLAB R2012b and higher and includes various bug fixes and other improvements. |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 3.3 | * | 14.05.2012 | 35 MB | ZIP | B_R_Automation_Studio_Target_for_Simulink_V3.3.zip | |
| Popis | Automation Studio Target for Simulink | |||||
