DWL@DWL10000059007

Verze Jazyk
Operační systém
Datum
Velikost
Typ Stáhnout
1.6.0.0 * 31.03.2021 2 MB EXE AS3.0_HW_X20IF2792.exe
Popis V3.0 HW Upgrade (X20IF2792)

Revision information X20IF2792

Version 1.6.0.0:

ID: 718925
Resolve potential boot and warm restart issue
In rare cases it could happen that the module is not reliably identified after a bootup or warm restart.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(16), 1\7974_1.pci(3), 1\7974_4.pci(4), 1\7974b0.can(130), 1\7974b1.can(130), 1\7974b4.can(0)

Version 1.5.0.0:

ID: 675925 / Support ID: 400312519
Support for HW variant 4
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(16), 1\7974_1.pci(3), 1\7974_4.pci(3), 1\7974b0.can(130), 1\7974b1.can(130), 1\7974b4.can(0)

Version 1.4.0.0:

ID: 685500 / Support ID: 400315650
Corrected handling of RTR objects
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(16), 1\7974_1.pci(3), 1\7974b0.can(130), 1\7974b1.can(130)

Version 1.3.0.0:

ID: 636280
Support for hardware variant 1
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(16), 1\7974_1.pci(3), 1\7974b0.can(122), 1\7974b1.can(122)

Version 1.1.0.0:

ID: 544315
Sporadic boot problem in combination with Compact-S and specific I/O configuration
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 584550
CAN passive error
In some rare cases the CAN controller in the BC detects erroneous bit errors in CAN frames if the incomingframe starts during a short period of time before the BC itself starts the transmission of a CAN frame.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(14), 1\7974b0.can(122)

Version 1.0.8.0:

ID: 517345
Module documentation revised
Data sheet V2.22
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.7.0:

ID: 473700
Error reading NodeSwitch corrected
Channel description changed: Yes
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.6.0:

ID: 460465
X2X data points completed and ModuleOK added
Channel description changed: Yes
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.5.2:

ID: 291775
Compatibility to ATOM CPU
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.4.0:

ID: 229090
CAN transmitter blockade aftercable un-/plugged corrected
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(6), 1\7974b0.can(122)

Version 1.0.3.0:

ID: 224465
CAN TransmitQueue Reset command corrected
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(6), 1\7974b0.can(120)

Version 1.0.2.0:

ID: 183715
New diagnostic data points
New diagnostic data points : Serial number, Module ID, Hardware variant, Firmware version
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(6), 1\7974b0.can(116)

Version 1.0.1.0:

ID: 164885
New Firmware V6
Error correction: problems when booting
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(6), 1\7974b0.can(116)
Verze Jazyk
Operační systém
Datum
Velikost
Typ Stáhnout
1.5.0.0 * 21.08.2020 2 MB EXE AS3.0_HW_X20IF2792.exe
Popis V3.0 HW Upgrade (X20IF2792)

Revision information X20IF2792

Version 1.5.0.0:

ID: 675925 / Support ID: 400312519
Support for HW variant 4
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(16), 1\7974_1.pci(3), 1\7974_4.pci(2), 1\7974b0.can(130), 1\7974b1.can(130), 1\7974b4.can(0)

Version 1.4.0.0:

ID: 685500 / Support ID: 400315650
Corrected handling of RTR objects
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(16), 1\7974_1.pci(3), 1\7974b0.can(130), 1\7974b1.can(130)

Version 1.3.0.0:

ID: 636280
Support for hardware variant 1
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(16), 1\7974_1.pci(3), 1\7974b0.can(122), 1\7974b1.can(122)

Version 1.1.0.0:

ID: 544315
Sporadic boot problem in combination with Compact-S and specific I/O configuration
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 584550
CAN passive error
In some rare cases the CAN controller in the BC detects erroneous bit errors in CAN frames if the incoming frame starts during a short period of timebefore the BC itself starts the transmission of a CAN frame.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(14), 1\7974b0.can(122)

Version1.0.8.0:

ID: 517345
Module documentation revised
Data sheet V2.22
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.7.0:

ID: 473700
Error reading NodeSwitch corrected
Channel description changed: Yes
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.6.0:

ID: 460465
X2X data points completed and ModuleOK added
Channel description changed: Yes
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.5.2:

ID: 291775
Compatibility to ATOM CPU
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.4.0:

ID: 229090
CAN transmitter blockade after cable un-/plugged corrected
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(6), 1\7974b0.can(122)

Version 1.0.3.0:

ID: 224465
CAN TransmitQueue Reset command corrected
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(6), 1\7974b0.can(120)

Version 1.0.2.0:

ID: 183715
New diagnostic data points
New diagnostic data points : Serial number, Module ID, Hardware variant, Firmware version
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(6), 1\7974b0.can(116)

Version 1.0.1.0:

ID: 164885
New Firmware V6
Error correction: problems when booting
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(6), 1\7974b0.can(116)
Verze Jazyk
Operační systém
Datum
Velikost
Typ Stáhnout
1.4.0.0 * 29.04.2020 1 MB EXE AS3.0_HW_X20IF2792.exe
Popis V3.0 HW Upgrade (X20IF2792)

Revision information X20IF2792

Version 1.4.0.0:

ID: 685500 / Support ID: 400315650
Corrected handling of RTR objects
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(16), 1\7974_1.pci(3), 1\7974b0.can(130), 1\7974b1.can(130)

Version 1.3.0.0:

ID: 636280
Support for hardware variant 1
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(16), 1\7974_1.pci(3), 1\7974b0.can(122), 1\7974b1.can(122)

Version 1.1.0.0:

ID: 544315
Sporadic boot problem in combination with Compact-S and specific I/O configuration
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 584550
CAN passive error
In somerare cases the CAN controller in the BC detects erroneous bit errorsin CAN frames if the incoming frame starts during a short period of time before the BCitself starts the transmission of a CAN frame.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(14), 1\7974b0.can(122)

Version 1.0.8.0:

ID: 517345
Module documentation revised
Data sheet V2.22
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.7.0:

ID: 473700
Error reading NodeSwitch corrected
Channel description changed: Yes
Configuration description changed:No
Firmware changed: No
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.6.0:

ID: 460465
X2X data points completed and ModuleOK added
Channel description changed: Yes
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.5.2:

ID: 291775
Compatibility to ATOM CPU
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.4.0:

ID: 229090
CAN transmitter blockade after cable un-/plugged corrected
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(6), 1\7974b0.can(122)

Version 1.0.3.0:

ID: 224465
CAN TransmitQueue Reset command corrected
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(6), 1\7974b0.can(120)

Version 1.0.2.0:

ID: 183715
New diagnostic data points
New diagnostic data points : Serial number, Module ID, Hardware variant, Firmware version
Channel description changed: No
Configuration description changed:No
Firmware changed: No
Firmware: 1\7974_0.pci(6), 1\7974b0.can(116)

Version 1.0.1.0:

ID: 164885
New Firmware V6
Error correction: problems when booting
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(6), 1\7974b0.can(116)
Verze Jazyk
Operační systém
Datum
Velikost
Typ Stáhnout
1.3.0.0 * 29.04.2019 1 MB EXE AS3.0_HW_X20IF2792.exe
Popis V3.0 HW Upgrade (X20IF2792)

Revision information X20IF2792

Version 1.3.0.0:

ID: 636280
Support for hardware variant 1
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(16), 1\7974_1.pci(3), 1\7974b0.can(122), 1\7974b1.can(122)

Version 1.1.0.0:

ID: 544315
Sporadic boot problem in combination with Compact-S and specific I/O configuration
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 584550
CAN passive error
In some rare cases the CAN controller in the BC detects erroneous bit errors in CAN frames if the incoming frame starts during a short period of time before the BC itself starts the transmission of a CAN frame.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(14), 1\7974b0.can(122)

Version 1.0.8.0:

ID: 517345
Module documentation revised
Data sheet V2.22
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.7.0:

ID: 473700
Error reading NodeSwitch corrected
Channel description changed: Yes
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.6.0:

ID: 460465
X2X data pointscompleted and ModuleOK added
Channel description changed: Yes
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.5.2:

ID: 291775
Compatibility to ATOM CPU
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.4.0:

ID: 229090
CAN transmitter blockade after cable un-/plugged corrected
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(6), 1\7974b0.can(122)

Version 1.0.3.0:

ID: 224465
CAN TransmitQueue Reset command corrected
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(6), 1\7974b0.can(120)

Version 1.0.2.0:

ID: 183715
New diagnostic data points
New diagnostic data points : Serial number, Module ID, Hardware variant, Firmware version
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(6), 1\7974b0.can(116)

Version 1.0.1.0:

ID: 164885
New Firmware V6
Error correction: problems when booting
Channel description changed:No
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(6), 1\7974b0.can(116)
Verze Jazyk
Operační systém
Datum
Velikost
Typ Stáhnout
1.1.0.0 * 03.04.2018 1 MB EXE AS3.0_HW_X20IF2792.exe
Popis V3.0 HW Upgrade (X20IF2792)

Revision information X20IF2792

Version 1.1.0.0:

ID: 544315
Sporadic boot problem in combination with Compact-S and specific I/O configuration
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 584550
CAN passive error
In some rare cases the CAN controller in the BC detects erroneous bit errors in CAN frames if the incoming frame starts during a short period of time before the BC itself starts the transmission of a CAN frame.
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(14), 1\7974b0.can(122)

Version 1.0.8.0:

ID: 517345
Module documentation revised
Data sheet V2.22
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.7.0:

ID: 473700
Error reading NodeSwitch corrected
Channel description changed: Yes
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.6.0:

ID: 460465
X2X data points completed and ModuleOK added
Channel description changed: Yes
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.5.2:

ID: 291775
Compatibility to ATOM CPU
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.4.0:

ID: 229090
CAN transmitter blockade after cable un-/plugged corrected
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(6), 1\7974b0.can(122)

Version 1.0.3.0:

ID: 224465
CAN TransmitQueue Reset command corrected
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware:1\7974_0.pci(6), 1\7974b0.can(120)

Version 1.0.2.0:

ID: 183715
New diagnostic data points
New diagnostic data points : Serial number, Module ID, Hardware variant, Firmware version
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(6), 1\7974b0.can(116)

Version 1.0.1.0:

ID: 164885
New Firmware V6
Error correction: problems when booting
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(6), 1\7974b0.can(116)
Verze Jazyk
Operační systém
Datum
Velikost
Typ Stáhnout
1.0.8.0 * 30.01.2017 1 MB EXE AS3.0_HW_X20IF2792.exe
Popis V3.0 HW Upgrade (X20IF2792)

Revision information X20IF2792

Version 1.0.8.0:

ID: 517345
Module documentation revised
Data sheet V2.22
Channel description changed: No
Configuration descriptionchanged: No
Firmware changed: No
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.7.0:

ID: 473700
Error reading NodeSwitch corrected
Channel description changed: Yes
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.6.0:

ID: 460465
X2X data points completed and ModuleOK added
Channel description changed: Yes
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.5.2:

ID: 291775
Compatibility to ATOM CPU
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware:1\7974_0.pci(10), 1\7974b0.can(122)

Version 1.0.4.0:

ID: 229090
CAN transmitter blockade after cable un-/plugged corrected
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(6), 1\7974b0.can(122)

Version 1.0.3.0:

ID: 224465
CAN TransmitQueue Reset command corrected
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\7974_0.pci(6), 1\7974b0.can(120)

Version 1.0.2.0:

ID: 183715
New diagnostic data points
New diagnostic data points : Serial number, Module ID, Hardware variant, Firmware version
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(6),1\7974b0.can(116)

Version 1.0.1.0:

ID: 164885
New Firmware V6
Error correction: problems when booting
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\7974_0.pci(6), 1\7974b0.can(116)
Loading
Zpět k seznamu

Vyberte prosím zemi a jazyk

B&R Logo