X20TB06

General information
Certifications
CE Yes
UKCA Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
DNV Temperature: B (0 to 55°C)
Humidity: B (up to 100%)
Vibration: B (4 g)
EMC: B (bridge and open deck)
LR ENV1
KR Yes
ABS Yes
BV EC33B
Temperature: 5 - 55°C
Vibration: 4 g
EMC: Bridge and open deck
Terminal block
Number of pins 6
Type of terminal block Push-in terminal
Push-in force per contact Typ. 10 N
Cable type Only copper wires (no aluminum wires!)
Wire stripping length 7 to 9 mm
Connection cross section
Single-wire 0.08 to 2.50 mm² / 28 to 14 AWG
Fine-stranded wires 0.25 to 2.50 mm² / 24 to 14 AWG
With wire end sleeve 0.25 to 1.50 mm² / 24 to 16 AWG
With double wire end sleeves Up to 2x 0.75 mm²
Distance between contacts
Left - Right 4.2 mm
Above - Below 10.96 mm
Electrical properties
Nominal voltage 240 VAC / 48 VDC
Max. voltage 300 VAC / 60 VDC
Nominal current 10 A / contact
Contact resistance ≤5 mΩ
Ambient conditions
Temperature
Operation Corresponds to the X20 module used
Relative humidity
Operation Corresponds to the X20 module used
物料号:
X20TB06
描述:
  • Tool-free wiring with push-in technology
  • Simple wire release using lever
  • Ability to label each terminal
  • Plain text labeling also possible
  • Test access for standard probes
  • Can be customer-coded

The X20 24 VDC modules are wired using the X20TB06 and X20TB12 terminal blocks.

请选择国家和语言

B&R Logo