Inloggning

X20TBS2

General information

Certifications
CE	Yes
UKCA	Yes

Terminal block

Number of pins	4
Type of terminal block	Design as push-in terminal block with actuating element
Push-in force per contact	Max. 3.5 N
Cable type	Only copper wires (no aluminum wires!)
Pitch	3.5 mm
Wire stripping length	10 mm
Connection cross section
AWG wire	30 to 16 AWG
Wire end sleeves with plastic covering	0.14 to 1.00 mm²
Single-wire	0.14 to 1.50 mm²
Fine-stranded wires	0.14 to 1.50 mm²
With wire end sleeve	0.14 to 1.50 mm²

Electrical properties

Nominal voltage	IEC: 320 V UL: 300 V
Nominal current	IEC: 10 A / contact UL: 9.5 A / contact
Contact resistance	≤5 mΩ

Ambient conditions

Temperature
Operation	-50 to 120°C
Relative humidity
Operation	5 to 95%, non-condensing

Materialnummer:

X20TBS2

Beskrivning:

Terminal block set for X20 I/O module: 8x 4-pin terminal block

Certifikat	Version (datum)	Ladda ner
EU Declaration of conformity PLC X20		PDF / 169 KB Inloggning för nedladdning
UK Declaration PLC X20		PDF / 151 KB Inloggning för nedladdning

Dokumentation	Version (datum)	Ladda ner
Data sheet X20TBS2		PDF / 434 KB Inloggning för nedladdning