8LVA - General motor data

Yes

Yes

PRHZ2.E235396

80 VDCPermissible DC bus voltage on the ACOPOS single-phase: 320 VDC

ytec circular connector

htec circular connector

F

Self-cooling, free circulation surface cooling (IC4A0A0)

---The 8LVA1 motor does not have a thermal temperature sensor and is protected by the motor temperature model in the servo drive.

Temperature sensor KTY83-110 (up to revision C7) / AM-LPTC1000 (revision C8 or later)

Maximum winding temperature 155°C
(limited by the thermal motor protection in the ACOPOSmicro drive system to 110°C with EnDat feedback and 130°C with resolver feedback)

Vibration severity level A

Based on DIN ISO 281

Form E

Form A

Form A keys, form N1 keyway

Shaft and fitment key convention

IEC 72-1

Water-based coating

RAL 9005 flat

S1 - Continuous operation

-15°C to +40°C

+50°CContinuous operation at an ambient temperature of +40°C to max. +50°C is possible, but this results in premature aging.

5 to 95%, non-condensing

5% per 5°C

10% per 1000 m

2000 mRequirements that go beyond this must be arranged with B&R.

65°C

IP54The degrees of protection are only achieved if the power and signal connections are fully installed. For IP54, the motor must be mounted with the mounting flange and this mounting must correspond at least to IP54 protection.

IP64 ⁵⁾ For IP64, the motor must be mounted with the mounting flange and this mounting must correspond at least to IP64 protection.

IP65 ⁵⁾

Horizontal, motor shaft aligned horizontally (IM 3001)

Vertical, motor standing on the machine (IM 3011)

Vertical, motor hanging on the machine (IM 3031)The IM3031 type of construction and mounting arrangement (vertical, motor hanging on the machine) must be avoided since production fluids or oils, e.g. from a gearbox, can penetrate the motor and damage it. If this is not possible, it is mandatory to select the oil seal option and to ensure that no production fluids or oils get onto the seal.

-20 to +60°C

Max. 90%, non-condensing

-20 to +60°C

Max. 90%, non-condensing

24 (+6% / -10%)