Key switch or pushbutton Emergency stop Enable switch RS232 Power supply CAN Ethernet
Additional connectors
Slot ID (monitoring contacts) Enable switch Key switch or pushbutton Emergency stop contacts Power supply
Push-pull connector
For connecting the Mobile Panel
Electrical properties
Nominal voltage
18 to 30 VDC
Nominal current
150 mA
Power consumption
Approx. 2 W
Operating conditions
Degree of protection per EN 60529
IP65 (only with installed screw plugs and protective cover or with connected Mobile Panel)
Ambient conditions
Temperature
Operation
0 to 50°C
Storage
-20 to 60°C
Transport
-20 to 60°C
Relative humidity
Operation
0 to 95%, non-condensing
Storage
0 to 95%, non-condensing
Transport
0 to 95%, non-condensing
Vibration
Operation (continuous)
2 to 9 Hz: 1.75 mm amplitude / 9 to 200 Hz: 0.5 g
Operation (occasional)
2 to 9 Hz: 3.5 mm amplitude / 9 to 200 Hz: 1 g
Storage
2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g
Transport
2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g
Shock
Operation
15 g, 11 ms
Storage
30 g, 15 ms
Transport
30 g, 15 ms
Mechanical properties
Housing
Material
GK-AISi11Mg (gravity die casting)
Coating
Powder-coated RAL 7012, fine structure
Cover plate
Material
GK-AlSi9Mg (gravity die casting)
Dimensions
Width
172.5 mm
Height
158.7 mm
Depth
81.7 mm
Weight
Approx. 1600 g (without attachment cable)
Materiaalnummer:
4MPCBX.0000-00
Omschrijving:
Compatible for connections with Mobile Panel 7x00
Emergency stop circuit not interrupted when disconnecting and connecting the Mobile Panel during operation (hot plugging function)
IP65 protection
Classification according to EN ISO 13849-1:2015 category 3, performance level (PL) d
Circular connector with push-pull locking mechanism
Emergency stop switch
Hot plug button
3x optional cable outlets
Compact dimensions
Robust construction
Connection box 4MPCBX.0000-00 makes it possible to set up a configuration where a Mobile Panel can be operated at various system connection points while still remaining integrated in the emergency stop circuit.
