Identification

X20TBS2

General information

Certifications
CE	Yes
UKCA	Yes

Terminal block

Number of pins	4
Type of terminal block	Design as push-in terminal block with actuating element
Push-in force per contact	Max. 3.5 N
Cable type	Only copper wires (no aluminum wires!)
Pitch	3.5 mm
Wire stripping length	10 mm
Connection cross section
AWG wire	30 to 16 AWG
Wire end sleeves with plastic covering	0.14 to 1.00 mm²
Single-wire	0.14 to 1.50 mm²
Fine-stranded wires	0.14 to 1.50 mm²
With wire end sleeve	0.14 to 1.50 mm²

Electrical properties

Nominal voltage	IEC: 320 V UL: 300 V
Nominal current	IEC: 10 A / contact UL: 9.5 A / contact
Contact resistance	≤5 mΩ

Ambient conditions

Temperature
Operation	-50 to 120°C
Relative humidity
Operation	5 to 95%, non-condensing

Référence produit:

X20TBS2

Description:

Terminal block set for X20 I/O module: 8x 4-pin terminal block

Certifications	Version (date)	Téléchargement
EU Declaration of conformity PLC X20		PDF / 169 Ko Identification pour téléchargement
UK Declaration PLC X20		PDF / 151 Ko Identification pour téléchargement

Documentation	Version (date)	Téléchargement
Data sheet X20TBS2		PDF / 434 Ko Identification pour téléchargement