Axis coupling with mapp Motion [SOC417.1]

In this learning path you will first get an overview of what axis coupling is, followed by linear and non-linear coupling. An example of a cap processing application is then implemented using cam automaton.

  • Courses:
  • Linear and non-linear axis coupling
  • Axis coupling with cam automat

Further information is provided below.

Available languages:

  • English

Order Code:

Linear and non-linear axis coupling

Description

This course will give you an overview of what axis coupling is, explaining linear and non-linear axis coupling with step-by-step instructions.

Content:

  • Introduction to axis coupling
  • Linear axis coupling
  • Non-linear axis coupling
  • Examples

Target group

Advanced Automation Studio users with some experience in motion control (collage and university students, employees and people who would like to learn more about axis coupling)

Requirements

  • Automation Studio and mapp Technology packages (mapp Motion, mapp Cockpit, mapp View) are installed
  • Motion control basics (see SOC415.1 / "Single-axis movement with mapp Motion")
  • The online course is based on the first part of the single axis movement project (configuring an axis, commissioning with mapp Cockpit, controller settings, and autotuning)

Topic duration

About 1-2 hours

Hardware used

The course is based on the following hardware:

  • X20CP1585 with ACOPOSmicro

The online course can also be performed using simulation.

Software used

  • Automation Studio version 4.12
  • Automation Runtime version B4.93
  • mapp Technology 5.19
Axis coupling with cam automat

Description

This course will give you an overview of what a cam automat is, explaining the different cams and states there are, and applying this theory using a real application. Step-by-step instructions will then explain how to configure a cam automat using mapp Technology.

Content:

  • Introduction to cam automat functionality
  • Application example: Cap processing application
  • MpAxisCamSequencer
  • States
  • Events and transitions
  • Cap application solution

Target group

Advanced Automation Studio users with some experience in motion control (collage and university students, employees and people who would like to learn more about axis coupling)

Requirements

  • Automation Studio and mapp Technology packages (mapp Motion, mapp Cockpit, mapp View) are installed
  • Motion control basics (see SOC415.1 / "Single-axis movement with mapp Motion")
  • The online course is based on the first part of the single axis movement project (configuring an axis, commissioning with mapp Cockpit, controller settings, and autotuning)

Topic duration

About 2-3 hours

Hardware used

The online course is based on the following hardware:

  • X20CP1585 with ACOPOSmicro

The online course can also be performed using simulation.

Software used

  • Automation Studio version 4.12
  • Automation Runtime version B4.93
  • mapp Technology 5.19

Bitte wählen Sie Land und Sprache aus:

B&R Logo